Nonstop flight route between Bainbridge, Georgia, United States and Grand Forks, North Dakota, United States:
Departure Airport:
Arrival Airport:
Distance from BGE to GFK:
Share this route:
Jump to:
- About this route
- BGE Airport Information
- GFK Airport Information
- Facts about BGE
- Facts about GFK
- Map of Nearest Airports to BGE
- List of Nearest Airports to BGE
- Map of Furthest Airports from BGE
- List of Furthest Airports from BGE
- Map of Nearest Airports to GFK
- List of Nearest Airports to GFK
- Map of Furthest Airports from GFK
- List of Furthest Airports from GFK
About this route:
A direct, nonstop flight between Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States and Grand Forks International Airport (GFK), Grand Forks, North Dakota, United States would travel a Great Circle distance of 1,346 miles (or 2,167 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Decatur County Industrial Air Park and Grand Forks International Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
IATA / ICAO Codes: | BGE / KBGE |
Airport Name: | Decatur County Industrial Air Park |
Location: | Bainbridge, Georgia, United States |
GPS Coordinates: | 30°58'18"N by 84°38'15"W |
Area Served: | Decatur County |
Operator/Owner: | Decatur County |
Airport Type: | Public |
Elevation: | 141 feet (43 meters) |
# of Runways: | 2 |
View all routes: | Routes from BGE |
More Information: | BGE Maps & Info |
Arrival Airport Information:
IATA / ICAO Codes: | GFK / KGFK |
Airport Name: | Grand Forks International Airport |
Location: | Grand Forks, North Dakota, United States |
GPS Coordinates: | 47°56'57"N by 97°10'33"W |
Operator/Owner: | Grand Forks Regional Airport Authority |
Airport Type: | Public |
Elevation: | 845 feet (258 meters) |
# of Runways: | 4 |
View all routes: | Routes from GFK |
More Information: | GFK Maps & Info |
Facts about Decatur County Industrial Air Park (BGE):
- The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
- A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
- During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.
- Decatur County Industrial Air Park (BGE) has 2 runways.
- Through the years a lot of material has been gathered about the Southern Airways School and Bainbridge Air Base.
- Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- Following entry of the United States into World War II, the Chief of the Army Air Corps directed the Air Corps Flying Training Command Southeast Training Center to immediately take action to select air base sites needed to increase its pilot training rate to meet anticipated wartime demands.
- The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
Facts about Grand Forks International Airport (GFK):
- GFK Flight Support, the fixed base operator at the airport, completed construction of a new $4.5 million facility in Fall 2008.
- The now closed original passenger terminal at GFK was built in 1964.
- Grand Forks International Airport (GFK) has 4 runways.
- FedEx is the second largest employer at KGFK.
- Due to the increased amount of general aviation traffic, primarily from the UND Aerospace flight training school, a fourth runway has been completed on the southeast side of the airport.
- The furthest airport from Grand Forks International Airport (GFK) is Margaret River Airport (MGV), which is located 10,514 miles (16,921 kilometers) away in Margaret River, Western Australia, Australia.
- A unique attribute of KGFK is that it is the University of North Dakota’s Aerospace program.
- The closest airport to Grand Forks International Airport (GFK) is Grand Forks Air Force Base (RDR), which is located only 10 miles (17 kilometers) W of GFK.
- Grand Forks International Airport is a public airport five miles northwest of Grand Forks, in Grand Forks County, North Dakota.
- Because of Grand Forks International Airport's relatively low elevation of 845 feet, planes can take off or land at Grand Forks International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.