Nonstop flight route between Bainbridge, Georgia, United States and Grand Forks, British Columbia, Canada:
Departure Airport:
Arrival Airport:
Distance from BGE to ZGF:
Share this route:
Jump to:
- About this route
- BGE Airport Information
- ZGF Airport Information
- Facts about BGE
- Facts about ZGF
- Map of Nearest Airports to BGE
- List of Nearest Airports to BGE
- Map of Furthest Airports from BGE
- List of Furthest Airports from BGE
- Map of Nearest Airports to ZGF
- List of Nearest Airports to ZGF
- Map of Furthest Airports from ZGF
- List of Furthest Airports from ZGF
About this route:
A direct, nonstop flight between Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States and Grand Forks Airport (ZGF), Grand Forks, British Columbia, Canada would travel a Great Circle distance of 2,152 miles (or 3,464 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Decatur County Industrial Air Park and Grand Forks Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
IATA / ICAO Codes: | BGE / KBGE |
Airport Name: | Decatur County Industrial Air Park |
Location: | Bainbridge, Georgia, United States |
GPS Coordinates: | 30°58'18"N by 84°38'15"W |
Area Served: | Decatur County |
Operator/Owner: | Decatur County |
Airport Type: | Public |
Elevation: | 141 feet (43 meters) |
# of Runways: | 2 |
View all routes: | Routes from BGE |
More Information: | BGE Maps & Info |
Arrival Airport Information:
IATA / ICAO Codes: | ZGF / CZGF |
Airport Name: | Grand Forks Airport |
Location: | Grand Forks, British Columbia, Canada |
GPS Coordinates: | 49°0'56"N by 118°25'50"W |
Operator/Owner: | City of Grand Forks |
Airport Type: | Public |
Elevation: | 1724 feet (525 meters) |
# of Runways: | 1 |
View all routes: | Routes from ZGF |
More Information: | ZGF Maps & Info |
Facts about Decatur County Industrial Air Park (BGE):
- The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
- A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
- Through the years a lot of material has been gathered about the Southern Airways School and Bainbridge Air Base.
- Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
- Decatur County Industrial Air Park (BGE) has 2 runways.
Facts about Grand Forks Airport (ZGF):
- The furthest airport from Grand Forks Airport (ZGF) is Tôlanaro Airport (FTU), which is located 10,602 miles (17,062 kilometers) away in Tôlanaro, Madagascar.
- Grand Forks Airport (ZGF) currently has only 1 runway.
- The closest airport to Grand Forks Airport (ZGF) is West Kootenay Regional Airport (YCG), which is located 41 miles (66 kilometers) ENE of ZGF.