Nonstop flight route between Fort Pierce, Florida, United States and Coconut Island (Poruma Island), Queensland, Australia:
Departure Airport:
Arrival Airport:
Distance from FPR to CNC:
Share this route:
Jump to:
- About this route
- FPR Airport Information
- CNC Airport Information
- Facts about FPR
- Facts about CNC
- Map of Nearest Airports to FPR
- List of Nearest Airports to FPR
- Map of Furthest Airports from FPR
- List of Furthest Airports from FPR
- Map of Nearest Airports to CNC
- List of Nearest Airports to CNC
- Map of Furthest Airports from CNC
- List of Furthest Airports from CNC
About this route:
A direct, nonstop flight between St. Lucie County International Airport (FPR), Fort Pierce, Florida, United States and Coconut Island (CNC), Coconut Island (Poruma Island), Queensland, Australia would travel a Great Circle distance of 9,371 miles (or 15,081 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between St. Lucie County International Airport and Coconut Island, the route shown on this map most likely appears curved because of this reason.
Try it at home! Get a globe and tightly lay a string between St. Lucie County International Airport and Coconut Island. You'll see that it will travel the same route of the red line on this map!
Departure Airport Information:
IATA / ICAO Codes: | FPR / KFPR |
Airport Name: | St. Lucie County International Airport |
Location: | Fort Pierce, Florida, United States |
GPS Coordinates: | 27°29'42"N by 80°22'5"W |
Operator/Owner: | St. Lucie Board of County Commissioners |
Airport Type: | Public |
Elevation: | 24 feet (7 meters) |
# of Runways: | 3 |
View all routes: | Routes from FPR |
More Information: | FPR Maps & Info |
Arrival Airport Information:
IATA / ICAO Codes: | CNC / YCCT |
Airport Name: | Coconut Island |
Location: | Coconut Island (Poruma Island), Queensland, Australia |
GPS Coordinates: | 10°3'0"S by 143°4'1"E |
Operator/Owner: | Torres Strait Island Regional Council |
Airport Type: | Private |
Elevation: | 10 feet (3 meters) |
# of Runways: | 1 |
View all routes: | Routes from CNC |
More Information: | CNC Maps & Info |
Facts about St. Lucie County International Airport (FPR):
- The airport sees frequent use by various aviation flight schools in south Florida, including three based at the airport, for general aviation flight training traffic.
- St. Lucie County International Airport (FPR) has 3 runways.
- The furthest airport from St. Lucie County International Airport (FPR) is Shark Bay Airport (MJK), which is located 11,569 miles (18,619 kilometers) away in Monkey Mia, Western Australia, Australia.
- The closest airport to St. Lucie County International Airport (FPR) is Vero Beach Municipal Airport (VRB), which is located only 12 miles (19 kilometers) NNW of FPR.
- Because of St. Lucie County International Airport's relatively low elevation of 24 feet, planes can take off or land at St. Lucie County International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- Runway 10L-28R was completed early 2010 costing $15.3 million, the runway currently has no taxiways to parking therefore making it designated for touch and go operations.
Facts about Coconut Island (CNC):
- Coconut Island (CNC) currently has only 1 runway.
- Because of Coconut Island's relatively low elevation of 10 feet, planes can take off or land at Coconut Island at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The closest airport to Coconut Island (CNC) is Yam Island Airport (XMY), which is located 23 miles (37 kilometers) WNW of CNC.
- The furthest airport from Coconut Island (CNC) is São Filipe Airport (SFL), which is located 11,533 miles (18,561 kilometers) away in Fogo, Cape Verde.