Nonstop flight route between Teterboro, New Jersey, United States and Bellingham, Washington, United States:
Departure Airport:
Arrival Airport:
Distance from TEB to BLI:
Share this route:
Jump to:
- About this route
- TEB Airport Information
- BLI Airport Information
- Facts about TEB
- Facts about BLI
- Map of Nearest Airports to TEB
- List of Nearest Airports to TEB
- Map of Furthest Airports from TEB
- List of Furthest Airports from TEB
- Map of Nearest Airports to BLI
- List of Nearest Airports to BLI
- Map of Furthest Airports from BLI
- List of Furthest Airports from BLI
About this route:
A direct, nonstop flight between Teterboro Airport (TEB), Teterboro, New Jersey, United States and Bellingham International Airport (BLI), Bellingham, Washington, United States would travel a Great Circle distance of 2,396 miles (or 3,855 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Teterboro Airport and Bellingham International Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
IATA / ICAO Codes: | TEB / KTEB |
Airport Name: | Teterboro Airport |
Location: | Teterboro, New Jersey, United States |
GPS Coordinates: | 40°51'0"N by 74°3'38"W |
Area Served: | Teterboro, New Jersey |
Airport Type: | Public |
Elevation: | 9 feet (3 meters) |
# of Runways: | 2 |
View all routes: | Routes from TEB |
More Information: | TEB Maps & Info |
Arrival Airport Information:
IATA / ICAO Codes: | BLI / KBLI |
Airport Names: |
|
Location: | Bellingham, Washington, United States |
GPS Coordinates: | 48°47'32"N by 122°32'14"W |
Area Served: | Bellingham, Washington |
Operator/Owner: | Port of Bellingham |
Airport Type: | Public |
Elevation: | 170 feet (52 meters) |
# of Runways: | 1 |
View all routes: | Routes from BLI |
More Information: | BLI Maps & Info |
Facts about Teterboro Airport (TEB):
- Teterboro Airport (TEB) has 2 runways.
- Nineteen hangars on the airport have a total area of about 412,000 square feet.
- In April 2009 the FAA reported that the airport had the third highest rate of wildlife strikes of any airport in the United States based on takeoffs and landings.
- The control tower was built on the east side of the airport by the FAA and went into operation on October 29, 1975.
- On September 23, 1981, a Ronson Aviation Bell 206B helicopter and a Seminole Air Charier Piper PA-34 airplane collided in flight over East Rutherford, about 2 nautical miles south of the Teterboro Airport.
- Because of Teterboro Airport's relatively low elevation of 9 feet, planes can take off or land at Teterboro Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The furthest airport from Teterboro Airport (TEB) is Margaret River Airport (MGV), which is located 11,744 miles (18,900 kilometers) away in Margaret River, Western Australia, Australia.
- The closest airport to Teterboro Airport (TEB) is West 30th Street Heliport (JRA), which is located only 7 miles (12 kilometers) SSE of TEB.
Facts about Bellingham International Airport (BLI):
- On March 1, 2008, Allegiant Air opened up their sixth base at Bellingham International Airport.
- Because of Bellingham International Airport's relatively low elevation of 170 feet, planes can take off or land at Bellingham International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- Northwest Sky Ferry offers scheduled and charter flights from Bellingham to the San Juan Islands in Washington, Seattle, Tacoma, Port Angeles, Olympia, and British Columbia.
- Bellingham International Airport has bustling general aviation activity, most of which is for the purpose of sightseeing in the San Juan Islands, Victoria in British Columbia, or the Canadian Gulf Islands.
- Bellingham International Airport (BLI) currently has only 1 runway.
- The Washington Air National Guard occupies a 7.5-acre site at Bellingham International Airport.
- The closest airport to Bellingham International Airport (BLI) is Blaine Municipal Airport (BWS), which is located only 16 miles (26 kilometers) NNW of BLI.
- The furthest airport from Bellingham International Airport (BLI) is Tôlanaro Airport (FTU), which is located 10,700 miles (17,220 kilometers) away in Tôlanaro, Madagascar.
- In addition to being known as "Bellingham International Airport", another name for BLI is "(Bellingham/Tulip Army Airfield)".
- In September 2010 the airport completed a $26 million resurfacing of the runway to allow aircraft up to the size of Boeing 757s to utilize the airport.
- In 1940 the United States Army Corps of Engineers took over the facility and expanded it to three full runways, revetments for parking aircraft, and development of personnel quarters.