Nonstop flight route between Hobart, Tasmania, Australia and Tin City, Alaska, United States:

About this route:

A direct, nonstop flight between Hobart International Airport (HBA), Hobart, Tasmania, Australia and Tin City LRRS Airport (TNC), Tin City, Alaska, United States would travel a Great Circle distance of 7,860 miles (or 12,649 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Hobart International Airport and Tin City LRRS Airport, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Hobart International Airport and Tin City LRRS Airport. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Hobart International Airport (HBA):

• During April 2007, the Hobart Airport's public relations firm confirmed they had submitted plans of the project to the Federal Government for assessment.
• The airport has seen strong passenger growth in the last few years, primarily due to the increase in services from low-cost carriers.
• Hobart International Airport (HBA) currently has only 1 runway.
• Hobart International Airport handled 1,855,849 passengers last year.
• The international terminal was opened in 1983 to facilitate Trans-Tasman air traffic.
• Because of Hobart International Airport's relatively low elevation of 13 feet, planes can take off or land at Hobart International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Hobart International Airport was established in 1956, after a review found the nearby Cambridge Aerodrome was unsuitable for Hobart's future air transport needs.
• The airport has purchased land from the Tasmanian Government in the southern part of the airport for future development of further operational facilities.
• The closest airport to Hobart International Airport (HBA) is Launceston Airport (LST), which is located 91 miles (146 kilometers) N of HBA.
• There are two domestic freight areas operating at the airport, catering for Australian air Express, Toll Air and Virgin Australia.
• The furthest airport from Hobart International Airport (HBA) is Corvo Airport (CVU), which is nearly antipodal to Hobart International Airport (meaning Hobart International Airport is almost on the exact opposite side of the Earth from Corvo Airport), and is located 12,207 miles (19,645 kilometers) away in Corvo Island, Azores, Portugal.

Facts about Tin City LRRS Airport (TNC):

• Tin City Airport is a United States Air Force military airstrip.
• Tin City LRRS Airport is a military airport located one nautical mile east of the central business district of Tin City, in the Nome Census Area of the U.S.
• The furthest airport from Tin City LRRS Airport (TNC) is Teniente Rodolfo Marsh Airport (TNM), which is located 10,379 miles (16,703 kilometers) away in Villa Las Estrellas, Antarctica.
• Tin City LRRS Airport (TNC) currently has only 1 runway.
• Because of Tin City LRRS Airport's relatively low elevation of 269 feet, planes can take off or land at Tin City LRRS Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The closest airport to Tin City LRRS Airport (TNC) is Wales Airport (WAA), which is located only 6 miles (10 kilometers) NW of TNC.
• It is not staffed by any support personnel, and is not open to the public.