Nonstop flight route between Tampa, Florida, United States and Bellingham, Washington, United States:

About this route:

A direct, nonstop flight between Tampa International Airport (TPA), Tampa, Florida, United States and Bellingham International Airport (BLI), Bellingham, Washington, United States would travel a Great Circle distance of 2,557 miles (or 4,115 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Tampa International Airport and Bellingham International Airport, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Tampa International Airport and Bellingham International Airport. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Tampa International Airport (TPA):

• Northwest Airlines and National Airlines brought the Jumbo Jet to the airport late in 1971 with the introduction of the Boeing 747 and McDonnell Douglas DC-10.
• The closest airport to Tampa International Airport (TPA) is Peter O. Knight Airport (TPF), which is located only 7 miles (11 kilometers) SE of TPA.
• Tampa International Airport (TPA) has 3 runways.
• Phase I of the economy parking garage was completed in November 2005.
• Because of Tampa International Airport's relatively low elevation of 26 feet, planes can take off or land at Tampa International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Below is a brief description of the four original airsides and the airlines that occupied them throughout the years.
• The furthest airport from Tampa International Airport (TPA) is Shark Bay Airport (MJK), which is located 11,435 miles (18,403 kilometers) away in Monkey Mia, Western Australia, Australia.

Facts about Bellingham International Airport (BLI):

• The furthest airport from Bellingham International Airport (BLI) is Tôlanaro Airport (FTU), which is located 10,700 miles (17,220 kilometers) away in Tôlanaro, Madagascar.
• In 1936 Whatcom County obtained 200 acres for an airport at the current airport site.
• In September 2010 the airport completed a $26 million resurfacing of the runway to allow aircraft up to the size of Boeing 757s to utilize the airport.
• The Washington Air National Guard occupies a 7.5-acre site at Bellingham International Airport.
• The early 21st century saw rapid expansion at the Bellingham International Airport from multiple large air carriers motivated by the potential passenger loads from lower mainland British Columbia.
• The closest airport to Bellingham International Airport (BLI) is Blaine Municipal Airport (BWS), which is located only 16 miles (26 kilometers) NNW of BLI.
• Because of Bellingham International Airport's relatively low elevation of 170 feet, planes can take off or land at Bellingham International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Bellingham International Airport (BLI) currently has only 1 runway.
• In addition to being known as "Bellingham International Airport", another name for BLI is "(Bellingham/Tulip Army Airfield)".