Nonstop flight route between Seattle, Washington, United States and Coatesville, Pennsylvania, United States:
Departure Airport:
Arrival Airport:
Distance from BFI to CTH:
Share this route:
Jump to:
- About this route
- BFI Airport Information
- CTH Airport Information
- Facts about BFI
- Facts about CTH
- Map of Nearest Airports to BFI
- List of Nearest Airports to BFI
- Map of Furthest Airports from BFI
- List of Furthest Airports from BFI
- Map of Nearest Airports to CTH
- List of Nearest Airports to CTH
- Map of Furthest Airports from CTH
- List of Furthest Airports from CTH
About this route:
A direct, nonstop flight between King County International Airport (BFI), Seattle, Washington, United States and Chester County G. O. Carlson Airport (CTH), Coatesville, Pennsylvania, United States would travel a Great Circle distance of 2,339 miles (or 3,764 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between King County International Airport and Chester County G. O. Carlson Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
IATA / ICAO Codes: | BFI / KBFI |
Airport Names: |
|
Location: | Seattle, Washington, United States |
GPS Coordinates: | 47°31'48"N by 122°18'6"W |
Area Served: | Seattle, Washington |
Airport Type: | Public |
Elevation: | 21 feet (6 meters) |
# of Runways: | 2 |
View all routes: | Routes from BFI |
More Information: | BFI Maps & Info |
Arrival Airport Information:
IATA / ICAO Codes: | CTH / KMQS |
Airport Names: |
|
Location: | Coatesville, Pennsylvania, United States |
GPS Coordinates: | 39°58'44"N by 75°51'56"W |
Operator/Owner: | Chester County Area Airport Authority |
Airport Type: | Public |
Elevation: | 660 feet (201 meters) |
# of Runways: | 1 |
View all routes: | Routes from CTH |
More Information: | CTH Maps & Info |
Facts about King County International Airport (BFI):
- It is in the National Plan of Integrated Airport Systems for 2011–2015, which called it a primary commercial service airport.Federal Aviation Administration records say the airport had 34,597 passenger boardings in calendar year 2008, 35,863 in 2009 and 33,656 in 2010.
- Boeing Field has no scheduled passenger jet flights.
- The initial assembly of the 737 was at Boeing Field in the 1960s because the factory in Renton was at capacity building the 707 and 727.
- The closest airport to King County International Airport (BFI) is Renton Municipal Airport (RNT), which is located only 5 miles (8 kilometers) ESE of BFI.
- At one point Aeroamerica scheduled a Boeing 720 to Spokane.
- Boeing Field/King County International Airport covers 634 acres at an elevation of 21 feet above mean sea level.
- King County International Airport (BFI) has 2 runways.
- In addition to being known as "King County International Airport", another name for BFI is "Boeing Field".
- The furthest airport from King County International Airport (BFI) is Tôlanaro Airport (FTU), which is located 10,775 miles (17,341 kilometers) away in Tôlanaro, Madagascar.
- The transfer of ownership of Boeing Field from King County to the Port of Seattle was proposed in 2007 as part of a land swap with land owned by the Port.
- The airport's property is mostly in Seattle just south of Georgetown, with its southern tip extending into Tukwila.
- Because of King County International Airport's relatively low elevation of 21 feet, planes can take off or land at King County International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
Facts about Chester County G. O. Carlson Airport (CTH):
- The furthest airport from Chester County G. O. Carlson Airport (CTH) is Margaret River Airport (MGV), which is located 11,702 miles (18,833 kilometers) away in Margaret River, Western Australia, Australia.
- Chester County G. O. Carlson Airport (CTH) currently has only 1 runway.
- As part of the 12-year-plan for the airport, many projects are planned.
- Chester County's airport identifier was 40N but it has recently changed to MQS.
- The airport opened May 1, 1928 as Coatesville Airport and was owned and operated by the City of Coatesville.
- The closest airport to Chester County G. O. Carlson Airport (CTH) is Brandywine Airport (OQN), which is located only 15 miles (24 kilometers) E of CTH.
- In addition to being known as "Chester County G. O. Carlson Airport", another name for CTH is "MQS".
- Because of Chester County G. O. Carlson Airport's relatively low elevation of 660 feet, planes can take off or land at Chester County G. O. Carlson Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.