Nonstop flight route between Bellingham, Washington, United States and between Baltimore, Maryland and Washington, D.C., United States:
Departure Airport:
Arrival Airport:
Distance from BLI to BWI:
Share this route:
Jump to:
- About this route
- BLI Airport Information
- BWI Airport Information
- Facts about BLI
- Facts about BWI
- Map of Nearest Airports to BLI
- List of Nearest Airports to BLI
- Map of Furthest Airports from BLI
- List of Furthest Airports from BLI
- Map of Nearest Airports to BWI
- List of Nearest Airports to BWI
- Map of Furthest Airports from BWI
- List of Furthest Airports from BWI
About this route:
A direct, nonstop flight between Bellingham International Airport (BLI), Bellingham, Washington, United States and Baltimore/Washington International Thurgood Marshall Airport (BWI), between Baltimore, Maryland and Washington, D.C., United States would travel a Great Circle distance of 2,336 miles (or 3,760 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Bellingham International Airport and Baltimore/Washington International Thurgood Marshall Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
| IATA / ICAO Codes: | BLI / KBLI |
| Airport Names: |
|
| Location: | Bellingham, Washington, United States |
| GPS Coordinates: | 48°47'32"N by 122°32'14"W |
| Area Served: | Bellingham, Washington |
| Operator/Owner: | Port of Bellingham |
| Airport Type: | Public |
| Elevation: | 170 feet (52 meters) |
| # of Runways: | 1 |
| View all routes: | Routes from BLI |
| More Information: | BLI Maps & Info |
Arrival Airport Information:
| IATA / ICAO Codes: | BWI / KBWI |
| Airport Name: | Baltimore/Washington International Thurgood Marshall Airport |
| Location: | between Baltimore, Maryland and Washington, D.C., United States |
| GPS Coordinates: | 39°10'31"N by 76°40'5"W |
| Area Served: | Baltimore–Washington Metropolitan Area |
| Operator/Owner: | Maryland Aviation Administration |
| Airport Type: | Public |
| Elevation: | 146 feet (45 meters) |
| # of Runways: | 4 |
| View all routes: | Routes from BWI |
| More Information: | BWI Maps & Info |
Facts about Bellingham International Airport (BLI):
- Because of Bellingham International Airport's relatively low elevation of 170 feet, planes can take off or land at Bellingham International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The furthest airport from Bellingham International Airport (BLI) is Tôlanaro Airport (FTU), which is located 10,700 miles (17,220 kilometers) away in Tôlanaro, Madagascar.
- The current terminal building was built in two phases.
- In addition to being known as "Bellingham International Airport", another name for BLI is "(Bellingham/Tulip Army Airfield)".
- In the 1990s homes were purchased to extend the runway in an effort to attract air carriers.
- Northwest Sky Ferry offers scheduled and charter flights from Bellingham to the San Juan Islands in Washington, Seattle, Tacoma, Port Angeles, Olympia, and British Columbia.
- In early 2007 Bellingham International hosted service to three destinations by the short-lived Western Airlines.
- The closest airport to Bellingham International Airport (BLI) is Blaine Municipal Airport (BWS), which is located only 16 miles (26 kilometers) NNW of BLI.
- Bellingham International Airport (BLI) currently has only 1 runway.
Facts about Baltimore/Washington International Thurgood Marshall Airport (BWI):
- The State of Maryland, through the Maryland Department of Transportation, purchased Friendship International Airport from the City of Baltimore for $36 million in 1972.
- With winds from the north or west, aircraft will generally land on runway 33L and depart on runway 28.
- The passenger terminal renovation program was complete in 1979, the most dramatic work of the airport's modernization, which was designed by DMJM along with Peterson & Brickbauer.
- The airport's cargo concourse covers a 395,000 sq ft area.
- The BWI Rail Station opened in 1980, providing a rail connection to passengers on the busy Northeast Corridor through Amtrak.
- Because of Baltimore/Washington International Thurgood Marshall Airport's relatively low elevation of 146 feet, planes can take off or land at Baltimore/Washington International Thurgood Marshall Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The furthest airport from Baltimore/Washington International Thurgood Marshall Airport (BWI) is Margaret River Airport (MGV), which is located 11,691 miles (18,814 kilometers) away in Margaret River, Western Australia, Australia.
- Planning for a new airport on 3,200 acres to serve the Baltimore/Washington area began just after the end of World War II.
- In late 2008, Health magazine named BWI the second healthiest airport in the United States.
- Baltimore/Washington International Thurgood Marshall Airport handled 22,391,785 passengers last year.
- Baltimore/Washington International Thurgood Marshall Airport (BWI) has 4 runways.
- The closest airport to Baltimore/Washington International Thurgood Marshall Airport (BWI) is Tipton Airport (FME), which is located only 8 miles (13 kilometers) SW of BWI.
