Nonstop flight route between Bellingham, Washington, United States and Muncie, Indiana, United States:
Departure Airport:

Arrival Airport:

Distance from BLI to MIE:
Share this route:
Jump to:
- About this route
- BLI Airport Information
- MIE Airport Information
- Facts about BLI
- Facts about MIE
- Map of Nearest Airports to BLI
- List of Nearest Airports to BLI
- Map of Furthest Airports from BLI
- List of Furthest Airports from BLI
- Map of Nearest Airports to MIE
- List of Nearest Airports to MIE
- Map of Furthest Airports from MIE
- List of Furthest Airports from MIE
About this route:
A direct, nonstop flight between Bellingham International Airport (BLI), Bellingham, Washington, United States and Delaware County Regional Airport (MIE), Muncie, Indiana, United States would travel a Great Circle distance of 1,901 miles (or 3,060 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Bellingham International Airport and Delaware County Regional Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
IATA / ICAO Codes: | BLI / KBLI |
Airport Names: |
|
Location: | Bellingham, Washington, United States |
GPS Coordinates: | 48°47'32"N by 122°32'14"W |
Area Served: | Bellingham, Washington |
Operator/Owner: | Port of Bellingham |
Airport Type: | Public |
Elevation: | 170 feet (52 meters) |
# of Runways: | 1 |
View all routes: | Routes from BLI |
More Information: | BLI Maps & Info |
Arrival Airport Information:
IATA / ICAO Codes: | MIE / KMIE |
Airport Name: | Delaware County Regional Airport |
Location: | Muncie, Indiana, United States |
GPS Coordinates: | 40°14'32"N by 85°23'44"W |
Area Served: | Muncie, Indiana |
Operator/Owner: | Delaware County Airport Authority |
Airport Type: | Public |
Elevation: | 937 feet (286 meters) |
# of Runways: | 2 |
View all routes: | Routes from MIE |
More Information: | MIE Maps & Info |
Facts about Bellingham International Airport (BLI):
- The runway and taxiway resurfacing and improvement projects were funded with FAA Airport Improvement Program grants covering 95% of project costs.
- The closest airport to Bellingham International Airport (BLI) is Blaine Municipal Airport (BWS), which is located only 16 miles (26 kilometers) NNW of BLI.
- The Washington Air National Guard occupies a 7.5-acre site at Bellingham International Airport.
- Because of Bellingham International Airport's relatively low elevation of 170 feet, planes can take off or land at Bellingham International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- In addition to being known as "Bellingham International Airport", another name for BLI is "(Bellingham/Tulip Army Airfield)".
- Bellingham International Airport is a public airport located three miles northwest of Bellingham, in Whatcom County, Washington, US, and the third-largest commercial airport in Washington.
- The furthest airport from Bellingham International Airport (BLI) is Tôlanaro Airport (FTU), which is located 10,700 miles (17,220 kilometers) away in Tôlanaro, Madagascar.
- Bellingham International Airport (BLI) currently has only 1 runway.
- The current terminal building was built in two phases.
- In 1940 the United States Army Corps of Engineers took over the facility and expanded it to three full runways, revetments for parking aircraft, and development of personnel quarters.
- In September 2010 the airport completed a $26 million resurfacing of the runway to allow aircraft up to the size of Boeing 757s to utilize the airport.
Facts about Delaware County Regional Airport (MIE):
- Because of Delaware County Regional Airport's relatively low elevation of 937 feet, planes can take off or land at Delaware County Regional Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The closest airport to Delaware County Regional Airport (MIE) is Anderson Municipal Airport (AID), which is located only 15 miles (24 kilometers) SW of MIE.
- The furthest airport from Delaware County Regional Airport (MIE) is Margaret River Airport (MGV), which is located 11,229 miles (18,072 kilometers) away in Margaret River, Western Australia, Australia.
- Delaware County Regional Airport (MIE) has 2 runways.