Nonstop flight route between Bellingham, Washington, United States and Santa Ana, California, United States:

About this route:

A direct, nonstop flight between Bellingham International Airport (BLI), Bellingham, Washington, United States and John Wayne Airport (SNA), Santa Ana, California, United States would travel a Great Circle distance of 1,072 miles (or 1,725 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Bellingham International Airport and John Wayne Airport, the route shown on this map most likely still appears to be a straight line.

Departure Airport Information:

Arrival Airport Information:

Facts about Bellingham International Airport (BLI):

• The closest airport to Bellingham International Airport (BLI) is Blaine Municipal Airport (BWS), which is located only 16 miles (26 kilometers) NNW of BLI.
• Bellingham International Airport (BLI) currently has only 1 runway.
• In September 2010 the airport completed a $26 million resurfacing of the runway to allow aircraft up to the size of Boeing 757s to utilize the airport.
• The furthest airport from Bellingham International Airport (BLI) is Tôlanaro Airport (FTU), which is located 10,700 miles (17,220 kilometers) away in Tôlanaro, Madagascar.
• In 1940 the United States Army Corps of Engineers took over the facility and expanded it to three full runways, revetments for parking aircraft, and development of personnel quarters.
• Bellingham International Airport has bustling general aviation activity, most of which is for the purpose of sightseeing in the San Juan Islands, Victoria in British Columbia, or the Canadian Gulf Islands.
• The airport is presently undergoing a significant expansion to the commercial passenger terminal building which will increase the size of the terminal building from 27,000 to 85,000 square feet.
• In addition to being known as "Bellingham International Airport", another name for BLI is "(Bellingham/Tulip Army Airfield)".
• The USAAF closed the facility in September 1946, and it was turned over to the War Assets Administration for disposal.
• Because of Bellingham International Airport's relatively low elevation of 170 feet, planes can take off or land at Bellingham International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.

Facts about John Wayne Airport (SNA):

• Because of John Wayne Airport's relatively low elevation of 56 feet, planes can take off or land at John Wayne Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The main passenger terminal, the Thomas F.
• The earliest dated depiction of Martin Airport which has been located was on a 1929 AAA street map.
• The furthest airport from John Wayne Airport (SNA) is Pierrefonds Airport (ZSE), which is located 11,490 miles (18,491 kilometers) away in Saint-Pierre, Réunion.
• Terminals A and B were designed by Gensler & Associates, Leason Pomeroy Associates, and Thompson Consultants International.
• In 1990, the Thomas F.
• John Wayne Airport (SNA) has 2 runways.
• The closest airport to John Wayne Airport (SNA) is MCAS El Toro (NZJ), which is located only 8 miles (13 kilometers) E of SNA.
• As of 2009, the largest airlines at John Wayne Airport were Southwest Airlines, United Airlines, American Airlines, Air Tran, and Alaska Airlines.