Nonstop flight route between Bellingham, Washington, United States and Stephenville, Newfoundland and Labrador, Canada:

About this route:

A direct, nonstop flight between Bellingham International Airport (BLI), Bellingham, Washington, United States and Stephenville Airport (YJT), Stephenville, Newfoundland and Labrador, Canada would travel a Great Circle distance of 2,830 miles (or 4,555 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Bellingham International Airport and Stephenville Airport, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Bellingham International Airport and Stephenville Airport. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Bellingham International Airport (BLI):

• Because of Bellingham International Airport's relatively low elevation of 170 feet, planes can take off or land at Bellingham International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The furthest airport from Bellingham International Airport (BLI) is Tôlanaro Airport (FTU), which is located 10,700 miles (17,220 kilometers) away in Tôlanaro, Madagascar.
• The airport is presently undergoing a significant expansion to the commercial passenger terminal building which will increase the size of the terminal building from 27,000 to 85,000 square feet.
• In 1940 the United States Army Corps of Engineers took over the facility and expanded it to three full runways, revetments for parking aircraft, and development of personnel quarters.
• The Washington Air National Guard occupies a 7.5-acre site at Bellingham International Airport.
• In addition to being known as "Bellingham International Airport", another name for BLI is "(Bellingham/Tulip Army Airfield)".
• The early 21st century saw rapid expansion at the Bellingham International Airport from multiple large air carriers motivated by the potential passenger loads from lower mainland British Columbia.
• Bellingham International Airport (BLI) currently has only 1 runway.
• The closest airport to Bellingham International Airport (BLI) is Blaine Municipal Airport (BWS), which is located only 16 miles (26 kilometers) NNW of BLI.

Facts about Stephenville Airport (YJT):

• The furthest airport from Stephenville Airport (YJT) is Albany Airport (ALH), which is located 11,479 miles (18,474 kilometers) away in Albany, Western Australia, Australia.
• Because of Stephenville Airport's relatively low elevation of 81 feet, planes can take off or land at Stephenville Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The mandate of the base was to maintain a tanker alert force and its capability to meet and refuel Strategic Air Command jet bombers en route to targets.
• Stephenville Airport (YJT) has 2 runways.
• The closest airport to Stephenville Airport (YJT) is Deer Lake Regional Airport (YDF), which is located 70 miles (112 kilometers) NE of YJT.
• In 1970 the airport was designated by international scheduled air transport and for international general aviation regular use.