Nonstop flight route between Perm, Russia and Osaka, Japan:

About this route:

A direct, nonstop flight between Perm International Airport (PEE), Perm, Russia and Kansai International Airport (KIX), Osaka, Japan would travel a Great Circle distance of 3,860 miles (or 6,212 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Perm International Airport and Kansai International Airport, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Perm International Airport and Kansai International Airport. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Perm International Airport (PEE):

• In addition to being known as "Perm International Airport", another name for PEE is "Международный аэропорт Пермь".
• This two-storey building, the ground floor being full size, and half size the level above, has been conceived as unique great roof in the shape of a delta covering a processor for domestic and international flights..
• The furthest airport from Perm International Airport (PEE) is Teniente Julio Gallardo Airfield (PNT), which is located 10,395 miles (16,729 kilometers) away in Puerto Natales, Chile.
• The closest airport to Perm International Airport (PEE) is Izhevsk Airport (IJK), which is located 121 miles (195 kilometers) SW of PEE.
• Because of Perm International Airport's relatively low elevation of 397 feet, planes can take off or land at Perm International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Construction of Bolshoye Savino took place in 1952 under the personal control of Marshal Zhukov, who was exiled by Stalin after World War II into the Urals to take command of the Ural Military District.
• Perm International Airport (PEE) currently has only 1 runway.

Facts about Kansai International Airport (KIX):

• The island had been predicted to sink 5.7 m by the most optimistic estimate as the weight of the material used for construction compressed the seabed silts.
• Because of Kansai International Airport's relatively low elevation of 17 feet, planes can take off or land at Kansai International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The closest airport to Kansai International Airport (KIX) is Kobe Airport (UKB), which is located only 14 miles (22 kilometers) N of KIX.
• In the 1960s, when the Kansai region was rapidly losing trade to Tokyo, planners proposed a new airport near Kobe and Osaka.
• A new terminal building opened in late 2012.
• The airport was at its limit during peak times, owing especially to freight flights, so a portion of Phase II expansion—the second runway—was made a priority.
• In addition to being known as "Kansai International Airport", other names for KIX include "関西国際空港" and "Kansai Kokusai Kūkō".
• After the protests surrounding New Tokyo International Airport, which was built with expropriated land in a rural part of Chiba Prefecture, planners decided to build the airport offshore.
• Kansai International Airport (KIX) has 2 runways.
• The furthest airport from Kansai International Airport (KIX) is Rio Grande Regional Airport (RIG), which is located 11,980 miles (19,279 kilometers) away in Rio Grande, Brazil.
• Peach requested that Terminal 2 have a simplified design in order to minimize operating costs.