Nonstop flight route between Reading, Pennsylvania, United States and Bellingham, Washington, United States:
Departure Airport:

Arrival Airport:

Distance from RDG to BLI:
Share this route:
Jump to:
- About this route
- RDG Airport Information
- BLI Airport Information
- Facts about RDG
- Facts about BLI
- Map of Nearest Airports to RDG
- List of Nearest Airports to RDG
- Map of Furthest Airports from RDG
- List of Furthest Airports from RDG
- Map of Nearest Airports to BLI
- List of Nearest Airports to BLI
- Map of Furthest Airports from BLI
- List of Furthest Airports from BLI
About this route:
A direct, nonstop flight between Reading Regional Airport (RDG), Reading, Pennsylvania, United States and Bellingham International Airport (BLI), Bellingham, Washington, United States would travel a Great Circle distance of 2,325 miles (or 3,742 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Reading Regional Airport and Bellingham International Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
IATA / ICAO Codes: | RDG / KRDG |
Airport Names: |
|
Location: | Reading, Pennsylvania, United States |
GPS Coordinates: | 40°22'42"N by 75°57'55"W |
Area Served: | Reading, Pennsylvania |
Operator/Owner: | Reading Regional Airport Authority |
Airport Type: | Public |
Elevation: | 344 feet (105 meters) |
# of Runways: | 2 |
View all routes: | Routes from RDG |
More Information: | RDG Maps & Info |
Arrival Airport Information:
IATA / ICAO Codes: | BLI / KBLI |
Airport Names: |
|
Location: | Bellingham, Washington, United States |
GPS Coordinates: | 48°47'32"N by 122°32'14"W |
Area Served: | Bellingham, Washington |
Operator/Owner: | Port of Bellingham |
Airport Type: | Public |
Elevation: | 170 feet (52 meters) |
# of Runways: | 1 |
View all routes: | Routes from BLI |
More Information: | BLI Maps & Info |
Facts about Reading Regional Airport (RDG):
- Opened as a civil airport in April 1938, Reading Airport was used by the United States Army Air Forces First Air Force as a training airfield during World War II.
- The closest airport to Reading Regional Airport (RDG) is Heritage Field (PTW), which is located 24 miles (38 kilometers) ESE of RDG.
- Since the 1950s the airport has been home to the Reading Composite Squadron of the U.S.
- On 1 June 1944 the 309th Air Base Squadron was re-designated the 85th Army Air Force Base Unit.
- Because of Reading Regional Airport's relatively low elevation of 344 feet, planes can take off or land at Reading Regional Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The furthest airport from Reading Regional Airport (RDG) is Margaret River Airport (MGV), which is located 11,683 miles (18,802 kilometers) away in Margaret River, Western Australia, Australia.
- Reading Army Airfield opened on 1 June 1943, with the 309th Base Headquarters and Air Base Squadron as its host unit.
- Southwest Airlines no longer operates in Reading Airport.
- In addition to being known as "Reading Regional Airport", another name for RDG is "Carl A. Spaatz FieldReading Army Airfield".
- Reading Regional Airport (RDG) has 2 runways.
Facts about Bellingham International Airport (BLI):
- The current terminal building was built in two phases.
- The closest airport to Bellingham International Airport (BLI) is Blaine Municipal Airport (BWS), which is located only 16 miles (26 kilometers) NNW of BLI.
- Bellingham International Airport has bustling general aviation activity, most of which is for the purpose of sightseeing in the San Juan Islands, Victoria in British Columbia, or the Canadian Gulf Islands.
- Because of Bellingham International Airport's relatively low elevation of 170 feet, planes can take off or land at Bellingham International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The airport is presently undergoing a significant expansion to the commercial passenger terminal building which will increase the size of the terminal building from 27,000 to 85,000 square feet.
- Bellingham International Airport (BLI) currently has only 1 runway.
- In response to the increased low fare competition offered by Allegiant in their home state, Alaska Airlines expanded service from Bellingham International.
- The USAAF closed the facility in September 1946, and it was turned over to the War Assets Administration for disposal.
- The furthest airport from Bellingham International Airport (BLI) is Tôlanaro Airport (FTU), which is located 10,700 miles (17,220 kilometers) away in Tôlanaro, Madagascar.
- In addition to being known as "Bellingham International Airport", another name for BLI is "(Bellingham/Tulip Army Airfield)".