Nonstop flight route between Grand Forks, North Dakota, United States and Cape Town, South Africa:

About this route:

A direct, nonstop flight between Grand Forks Air Force Base (RDR), Grand Forks, North Dakota, United States and Cape Town International Airport (CPT), Cape Town, South Africa would travel a Great Circle distance of 9,064 miles (or 14,586 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Grand Forks Air Force Base and Cape Town International Airport, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Grand Forks Air Force Base and Cape Town International Airport. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Grand Forks Air Force Base (RDR):

• On 3 November 1967, the Department of Defense revealed that GFAFB was one of 10 initial locations to host a Sentinel Anti-Ballistic Missile site.
• The furthest airport from Grand Forks Air Force Base (RDR) is Margaret River Airport (MGV), which is located 10,504 miles (16,904 kilometers) away in Margaret River, Western Australia, Australia.
• On 18 February 1957, the 478th Fighter Group was activated at Grand Forks.
• In addition to being known as "Grand Forks Air Force Base", another name for RDR is "Grand Forks AFB".
• On 1 February 1993, ACC dropped the 319th Bomb Wing's primary nuclear mission and gave the wing the primary mission of B-1B conventional bombardment operations.
• In 1973, the 319th Bomb Wing acquired the AGM-69 Short Range Attack Missile, replacing the older AGM-28 Hound Dog air-to-ground missile aboard its B-52H aircraft.
• During the Cold War, GFAFB was a major installation of the Strategic Air Command, with B-52 bombers, KC-135 tankers, and Minuteman intercontinental ballistic missiles.
• The closest airport to Grand Forks Air Force Base (RDR) is Grand Forks International Airport (GFK), which is located only 10 miles (17 kilometers) E of RDR.

Facts about Cape Town International Airport (CPT):

• The only hotel located within the airport precinct is the budget Road Lodge, owned by the City Lodge hotel chain group.
• The following is an example of information required by aircrew to operate at this airport.
• Cape Town International Airport was opened in 1954, a year after Jan Smuts Airport on the Witwatersrand opened.
• Cape Town International Airport is approximately 20 kilometres from the city centre and is accessible from the N2 freeway, with Airport Approach Road providing a direct link between the N2 and the airport.
• Cape Town International Airport handled 8,505,563 passengers last year.
• Because of Cape Town International Airport's relatively low elevation of 151 feet, planes can take off or land at Cape Town International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Cape Town International Airport (CPT) has 2 runways.
• Apart from completion of the 2010 expansion project, it has been proposed that a second runway for large aircraft be constructed at Cape Town International Airport.
• The furthest airport from Cape Town International Airport (CPT) is Princeville Airport (HPV), which is located 11,616 miles (18,693 kilometers) away in Hanalei, Hawaii, United States.
• The closest airport to Cape Town International Airport (CPT) is George Airport (GRJ), which is located 217 miles (349 kilometers) E of CPT.
• The terminal building has a split-level design, with departures located in the upper floors and arrivals in the lower floors.