Nonstop flight route between St. Paul, Minnesota, United States and Seattle, Washington, United States:
Departure Airport:
Arrival Airport:
Distance from STP to BFI:
Share this route:
Jump to:
- About this route
- STP Airport Information
- BFI Airport Information
- Facts about STP
- Facts about BFI
- Map of Nearest Airports to STP
- List of Nearest Airports to STP
- Map of Furthest Airports from STP
- List of Furthest Airports from STP
- Map of Nearest Airports to BFI
- List of Nearest Airports to BFI
- Map of Furthest Airports from BFI
- List of Furthest Airports from BFI
About this route:
A direct, nonstop flight between St. Paul Downtown Airport (STP), St. Paul, Minnesota, United States and King County International Airport (BFI), Seattle, Washington, United States would travel a Great Circle distance of 1,401 miles (or 2,254 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between St. Paul Downtown Airport and King County International Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
| IATA / ICAO Codes: | STP / KSTP |
| Airport Names: |
|
| Location: | St. Paul, Minnesota, United States |
| GPS Coordinates: | 44°56'3"N by 93°3'36"W |
| Area Served: | St. Paul, Minnesota |
| Operator/Owner: | Metropolitan Airports Commission |
| Airport Type: | Public |
| Elevation: | 705 feet (215 meters) |
| # of Runways: | 3 |
| View all routes: | Routes from STP |
| More Information: | STP Maps & Info |
Arrival Airport Information:
| IATA / ICAO Codes: | BFI / KBFI |
| Airport Names: |
|
| Location: | Seattle, Washington, United States |
| GPS Coordinates: | 47°31'48"N by 122°18'6"W |
| Area Served: | Seattle, Washington |
| Airport Type: | Public |
| Elevation: | 21 feet (6 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from BFI |
| More Information: | BFI Maps & Info |
Facts about St. Paul Downtown Airport (STP):
- St. Paul Downtown Airport (STP) has 3 runways.
- During World War II, Northwest Airlines employed up to 5,000 people at the site, modifying new B-24 Liberator bombers, some of which received the highly classified H2X radar, which proved to be an invaluable tool in the European theater.
- The closest airport to St. Paul Downtown Airport (STP) is Minneapolis–Saint Paul International Airport Wold–Chamberlain Airport (MSP), which is located only 9 miles (14 kilometers) WSW of STP.
- Because of St. Paul Downtown Airport's relatively low elevation of 705 feet, planes can take off or land at St. Paul Downtown Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- In addition to being known as "St. Paul Downtown Airport", another name for STP is "Holman Field".
- During the 1970s and early 1980s, commuter airline Lake State Airways offered scheduled airline service between the St.
- Holman Field Administration Building with historic Control Tower
- The furthest airport from St. Paul Downtown Airport (STP) is Margaret River Airport (MGV), which is located 10,764 miles (17,324 kilometers) away in Margaret River, Western Australia, Australia.
Facts about King County International Airport (BFI):
- Passenger terminal, Boeing Field
- Because of King County International Airport's relatively low elevation of 21 feet, planes can take off or land at King County International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The initial assembly of the 737 was at Boeing Field in the 1960s because the factory in Renton was at capacity building the 707 and 727.
- Boeing Field/King County International Airport covers 634 acres at an elevation of 21 feet above mean sea level.
- Boeing Field had scheduled passenger flights on West Coast Airlines Douglas DC-9s and Fairchild F-27s to Idaho, Oregon, Washington, northern California, western Montana, northern Utah and to Calgary.
- The August 1946 OAG shows 24 United Airlines weekday departures, 10 Northwest and two or three Pan Am DC-3s to Juneau via Annette Island.
- King County International Airport (BFI) has 2 runways.
- The closest airport to King County International Airport (BFI) is Renton Municipal Airport (RNT), which is located only 5 miles (8 kilometers) ESE of BFI.
- The furthest airport from King County International Airport (BFI) is Tôlanaro Airport (FTU), which is located 10,775 miles (17,341 kilometers) away in Tôlanaro, Madagascar.
- It is in the National Plan of Integrated Airport Systems for 2011–2015, which called it a primary commercial service airport.Federal Aviation Administration records say the airport had 34,597 passenger boardings in calendar year 2008, 35,863 in 2009 and 33,656 in 2010.
- In addition to being known as "King County International Airport", another name for BFI is "Boeing Field".
