Nonstop flight route between Newburgh, New York, United States and Bellingham, Washington, United States:
Departure Airport:
Arrival Airport:
Distance from SWF to BLI:
Share this route:
Jump to:
- About this route
- SWF Airport Information
- BLI Airport Information
- Facts about SWF
- Facts about BLI
- Map of Nearest Airports to SWF
- List of Nearest Airports to SWF
- Map of Furthest Airports from SWF
- List of Furthest Airports from SWF
- Map of Nearest Airports to BLI
- List of Nearest Airports to BLI
- Map of Furthest Airports from BLI
- List of Furthest Airports from BLI
About this route:
A direct, nonstop flight between Stewart International Airport (SWF), Newburgh, New York, United States and Bellingham International Airport (BLI), Bellingham, Washington, United States would travel a Great Circle distance of 2,371 miles (or 3,816 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Stewart International Airport and Bellingham International Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
IATA / ICAO Codes: | SWF / KSWF |
Airport Name: | Stewart International Airport |
Location: | Newburgh, New York, United States |
GPS Coordinates: | 41°30'15"N by 74°6'16"W |
Area Served: | Hudson Valley |
Operator/Owner: | State of New York |
Airport Type: | Public / Military |
Elevation: | 491 feet (150 meters) |
# of Runways: | 2 |
View all routes: | Routes from SWF |
More Information: | SWF Maps & Info |
Arrival Airport Information:
IATA / ICAO Codes: | BLI / KBLI |
Airport Names: |
|
Location: | Bellingham, Washington, United States |
GPS Coordinates: | 48°47'32"N by 122°32'14"W |
Area Served: | Bellingham, Washington |
Operator/Owner: | Port of Bellingham |
Airport Type: | Public |
Elevation: | 170 feet (52 meters) |
# of Runways: | 1 |
View all routes: | Routes from BLI |
More Information: | BLI Maps & Info |
Facts about Stewart International Airport (SWF):
- After its closure as an air force base in the early 1970s, an ambitious plan by former Governor Nelson Rockefeller to expand and develop the airport led to a protracted struggle with local landowners that led to reforms in the state's eminent domain laws but no actual development of the land acquired.
- Federal law at the time required that all airports providing passenger service had to be owned by some public entity.
- Because of Stewart International Airport's relatively low elevation of 491 feet, planes can take off or land at Stewart International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- This area of the airport, now called Stewart Air National Guard Base, was home to the air force's C-5A Galaxy before being replaced by the newer and smaller C-17 Globemaster III in 2011.
- In the early 1970s, Governor Nelson Rockefeller's administration saw the potential for Stewart to support the metropolitan area.
- Stewart International Airport (SWF) has 2 runways.
- The award also ended, for the most part, the controversy over whether to develop the properties or not.
- The region's needs had changed.
- The closest airport to Stewart International Airport (SWF) is Orange County Airport (MGJ), which is located only 8 miles (13 kilometers) W of SWF.
- The furthest airport from Stewart International Airport (SWF) is Margaret River Airport (MGV), which is located 11,712 miles (18,848 kilometers) away in Margaret River, Western Australia, Australia.
Facts about Bellingham International Airport (BLI):
- Bellingham International Airport (BLI) currently has only 1 runway.
- The closest airport to Bellingham International Airport (BLI) is Blaine Municipal Airport (BWS), which is located only 16 miles (26 kilometers) NNW of BLI.
- In September 2010 the airport completed a $26 million resurfacing of the runway to allow aircraft up to the size of Boeing 757s to utilize the airport.
- In the 1990s homes were purchased to extend the runway in an effort to attract air carriers.
- The early 21st century saw rapid expansion at the Bellingham International Airport from multiple large air carriers motivated by the potential passenger loads from lower mainland British Columbia.
- The furthest airport from Bellingham International Airport (BLI) is Tôlanaro Airport (FTU), which is located 10,700 miles (17,220 kilometers) away in Tôlanaro, Madagascar.
- In addition to being known as "Bellingham International Airport", another name for BLI is "(Bellingham/Tulip Army Airfield)".
- Because of Bellingham International Airport's relatively low elevation of 170 feet, planes can take off or land at Bellingham International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- Bellingham International Airport has bustling general aviation activity, most of which is for the purpose of sightseeing in the San Juan Islands, Victoria in British Columbia, or the Canadian Gulf Islands.