Nonstop flight route between Aniak, Alaska, United States and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Aniak Airport (ANI), Aniak, Alaska, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 3,871 miles (or 6,229 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Aniak Airport and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Aniak Airport and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Aniak Airport (ANI):

• Because of Aniak Airport's relatively low elevation of 89 feet, planes can take off or land at Aniak Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• As per Federal Aviation Administration records, the airport had 18,526 passenger boardings in calendar year 2008, 16,255 enplanements in 2009, and 16,394 in 2010.
• The furthest airport from Aniak Airport (ANI) is George Airport (GRJ), which is located 10,530 miles (16,946 kilometers) away in George, South Africa.
• The closest airport to Aniak Airport (ANI) is Chuathbaluk Airport (CHU), which is located only 11 miles (17 kilometers) E of ANI.
• Aniak Airport (ANI) has 2 runways.
• Aniak Airport covers an area of 1,722 acres at an elevation of 89 feet above mean sea level.

Facts about Decatur County Industrial Air Park (BGE):

• A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Today, Bainbridge is used for various purposes in addition to a small amount of aviation activity.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• There was little need, however, for the airfield, and in the immediate postwar years, farmers leased the open areas of the airfield for cultivation and the cantonment area was used for various purposes.