Nonstop flight route between Bainbridge, Georgia, United States and Burlington, Iowa, United States:
Departure Airport:
Arrival Airport:
Distance from BGE to BRL:
Share this route:
Jump to:
- About this route
- BGE Airport Information
- BRL Airport Information
- Facts about BGE
- Facts about BRL
- Map of Nearest Airports to BGE
- List of Nearest Airports to BGE
- Map of Furthest Airports from BGE
- List of Furthest Airports from BGE
- Map of Nearest Airports to BRL
- List of Nearest Airports to BRL
- Map of Furthest Airports from BRL
- List of Furthest Airports from BRL
About this route:
A direct, nonstop flight between Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States and Southeast Iowa Regional Airport (BRL), Burlington, Iowa, United States would travel a Great Circle distance of 769 miles (or 1,237 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Decatur County Industrial Air Park and Southeast Iowa Regional Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
| IATA / ICAO Codes: | BGE / KBGE |
| Airport Name: | Decatur County Industrial Air Park |
| Location: | Bainbridge, Georgia, United States |
| GPS Coordinates: | 30°58'18"N by 84°38'15"W |
| Area Served: | Decatur County |
| Operator/Owner: | Decatur County |
| Airport Type: | Public |
| Elevation: | 141 feet (43 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from BGE |
| More Information: | BGE Maps & Info |
Arrival Airport Information:
| IATA / ICAO Codes: | BRL / KBRL |
| Airport Name: | Southeast Iowa Regional Airport |
| Location: | Burlington, Iowa, United States |
| GPS Coordinates: | 40°46'59"N by 91°7'32"W |
| Area Served: | Burlington, Iowa |
| Operator/Owner: | Southeast Iowa Regional Airport Authority |
| Airport Type: | Public |
| Elevation: | 698 feet (213 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from BRL |
| More Information: | BRL Maps & Info |
Facts about Decatur County Industrial Air Park (BGE):
- A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
- The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
- Decatur County Industrial Air Park (BGE) has 2 runways.
- During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.
- There was little need, however, for the airfield, and in the immediate postwar years, farmers leased the open areas of the airfield for cultivation and the cantonment area was used for various purposes.
- The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
- The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
- Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- Through the years a lot of material has been gathered about the Southern Airways School and Bainbridge Air Base.
- Decatur County Industrial Air Park Airport covers an area of 940 acres at an elevation of 141 feet above mean sea level.
Facts about Southeast Iowa Regional Airport (BRL):
- Because of Southeast Iowa Regional Airport's relatively low elevation of 698 feet, planes can take off or land at Southeast Iowa Regional Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- In 1943, a contract was signed with the U.S.
- Southeast Iowa Regional Airport is a public use airport located two nautical miles southwest of the central business district of Burlington, a city in Des Moines County, Iowa, United States.
- On November 19, 1996, United Express Flight 5925 departed Burlington bound for Quincy, IL collided with a King Air near the runway 4/13 intersection at Quincy Regional Airport.
- The airport's hours of operation were extended in 1959 when runway lights were installed, enabling flights to takeoff and land at night.
- On May 30, 2013, winds from a severe thunderstorm damaged and destroyed several hangars.
- The closest airport to Southeast Iowa Regional Airport (BRL) is Mount Pleasant Municipal Airport (MPZ), which is located 23 miles (37 kilometers) WNW of BRL.
- The furthest airport from Southeast Iowa Regional Airport (BRL) is Margaret River Airport (MGV), which is located 10,927 miles (17,586 kilometers) away in Margaret River, Western Australia, Australia.
- Southeast Iowa Regional Airport (BRL) has 2 runways.
