Nonstop flight route between Bainbridge, Georgia, United States and Sioux Falls, South Dakota, United States:

About this route:

A direct, nonstop flight between Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States and Sioux Falls Regional Airport (FSD), Sioux Falls, South Dakota, United States would travel a Great Circle distance of 1,094 miles (or 1,760 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Decatur County Industrial Air Park and Sioux Falls Regional Airport, the route shown on this map most likely still appears to be a straight line.

Departure Airport Information:

Arrival Airport Information:

Facts about Decatur County Industrial Air Park (BGE):

• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• There was little need, however, for the airfield, and in the immediate postwar years, farmers leased the open areas of the airfield for cultivation and the cantonment area was used for various purposes.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• Today, Bainbridge is used for various purposes in addition to a small amount of aviation activity.
• Decatur County Industrial Air Park Airport covers an area of 940 acres at an elevation of 141 feet above mean sea level.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.

Facts about Sioux Falls Regional Airport (FSD):

• Sioux Falls Regional Airport (FSD) has 3 runways.
• In addition to being known as "Sioux Falls Regional Airport", another name for FSD is "Joe Foss Field".
• The closest airport to Sioux Falls Regional Airport (FSD) is Madison Municipal Airport (XMD), which is located 35 miles (56 kilometers) NNW of FSD.
• Beginning in the spring of 2009, the Sioux Falls Regional Airport embarked on a 3 phase multi-year, multi-million dollar renovation and expansion project, designed by Koch Hazard Architects, that included renovating and expanding the ticketing and check-in counter area, renovating the ground floor gift shop, updating and renovating the concourse, and updating and expanding the airport's parking operations.
• Sioux Falls Regional Airport was originally the Sioux Falls Army Air Base constructed during World War II and closed permanently in the mid-1960s.
• The furthest airport from Sioux Falls Regional Airport (FSD) is Margaret River Airport (MGV), which is located 10,610 miles (17,075 kilometers) away in Margaret River, Western Australia, Australia.