Nonstop flight route between Bellingham, Washington, United States and Saint-Pierre, Saint Pierre and Miquelon, France:

About this route:

A direct, nonstop flight between Bellingham International Airport (BLI), Bellingham, Washington, United States and Saint-Pierre Airport (FSP), Saint-Pierre, Saint Pierre and Miquelon, France would travel a Great Circle distance of 2,984 miles (or 4,803 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Bellingham International Airport and Saint-Pierre Airport, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Bellingham International Airport and Saint-Pierre Airport. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Bellingham International Airport (BLI):

• In addition to being known as "Bellingham International Airport", another name for BLI is "(Bellingham/Tulip Army Airfield)".
• In 1985, Pacific Southwest Airlines introduced Bellingham's first ever passenger jet service with McDonnell Douglas MD-80 flights direct to Los Angeles, San Diego and San Francisco.
• The furthest airport from Bellingham International Airport (BLI) is Tôlanaro Airport (FTU), which is located 10,700 miles (17,220 kilometers) away in Tôlanaro, Madagascar.
• The Washington Air National Guard occupies a 7.5-acre site at Bellingham International Airport.
• The closest airport to Bellingham International Airport (BLI) is Blaine Municipal Airport (BWS), which is located only 16 miles (26 kilometers) NNW of BLI.
• Because of Bellingham International Airport's relatively low elevation of 170 feet, planes can take off or land at Bellingham International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Bellingham International Airport (BLI) currently has only 1 runway.
• The current terminal building was built in two phases.
• The early 21st century saw rapid expansion at the Bellingham International Airport from multiple large air carriers motivated by the potential passenger loads from lower mainland British Columbia.

Facts about Saint-Pierre Airport (FSP):

• The airport currently handles turboprop aircraft, but it can handle small jets up to a Boeing 737 or an Airbus A319/Airbus A320.
• Because of Saint-Pierre Airport's relatively low elevation of 26 feet, planes can take off or land at Saint-Pierre Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• In addition to being known as "Saint-Pierre Airport", another name for FSP is "Aéroport de Saint-Pierre Pointe-Blanche".
• The closest airport to Saint-Pierre Airport (FSP) is Miquelon Airport (MQC), which is located 25 miles (40 kilometers) NNW of FSP.
• Saint-Pierre Airport (FSP) currently has only 1 runway.
• The furthest airport from Saint-Pierre Airport (FSP) is Albany Airport (ALH), which is located 11,562 miles (18,608 kilometers) away in Albany, Western Australia, Australia.
• The airport was completed in August 1999 and consists of four buildings and a control tower.