Nonstop flight route between Bellingham, Washington, United States and Townsville, Queensland, Australia:
Departure Airport:
Arrival Airport:
Distance from BLI to TSV:
Share this route:
Jump to:
- About this route
- BLI Airport Information
- TSV Airport Information
- Facts about BLI
- Facts about TSV
- Map of Nearest Airports to BLI
- List of Nearest Airports to BLI
- Map of Furthest Airports from BLI
- List of Furthest Airports from BLI
- Map of Nearest Airports to TSV
- List of Nearest Airports to TSV
- Map of Furthest Airports from TSV
- List of Furthest Airports from TSV
About this route:
A direct, nonstop flight between Bellingham International Airport (BLI), Bellingham, Washington, United States and Townsville Airport (TSV), Townsville, Queensland, Australia would travel a Great Circle distance of 7,242 miles (or 11,655 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Bellingham International Airport and Townsville Airport, the route shown on this map most likely appears curved because of this reason.
Try it at home! Get a globe and tightly lay a string between Bellingham International Airport and Townsville Airport. You'll see that it will travel the same route of the red line on this map!
Departure Airport Information:
| IATA / ICAO Codes: | BLI / KBLI |
| Airport Names: |
|
| Location: | Bellingham, Washington, United States |
| GPS Coordinates: | 48°47'32"N by 122°32'14"W |
| Area Served: | Bellingham, Washington |
| Operator/Owner: | Port of Bellingham |
| Airport Type: | Public |
| Elevation: | 170 feet (52 meters) |
| # of Runways: | 1 |
| View all routes: | Routes from BLI |
| More Information: | BLI Maps & Info |
Arrival Airport Information:
| IATA / ICAO Codes: | TSV / YBTL |
| Airport Names: |
|
| Location: | Townsville, Queensland, Australia |
| GPS Coordinates: | 19°15'11"S by 146°45'53"E |
| Area Served: | Townsville, Queensland |
| Operator/Owner: | Department of Defence |
| Airport Type: | Military/Public |
| Elevation: | 18 feet (5 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from TSV |
| More Information: | TSV Maps & Info |
Facts about Bellingham International Airport (BLI):
- Bellingham International Airport has bustling general aviation activity, most of which is for the purpose of sightseeing in the San Juan Islands, Victoria in British Columbia, or the Canadian Gulf Islands.
- In addition to being known as "Bellingham International Airport", another name for BLI is "(Bellingham/Tulip Army Airfield)".
- The early 21st century saw rapid expansion at the Bellingham International Airport from multiple large air carriers motivated by the potential passenger loads from lower mainland British Columbia.
- Because of Bellingham International Airport's relatively low elevation of 170 feet, planes can take off or land at Bellingham International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The closest airport to Bellingham International Airport (BLI) is Blaine Municipal Airport (BWS), which is located only 16 miles (26 kilometers) NNW of BLI.
- Bellingham International Airport (BLI) currently has only 1 runway.
- Northwest Sky Ferry offers scheduled and charter flights from Bellingham to the San Juan Islands in Washington, Seattle, Tacoma, Port Angeles, Olympia, and British Columbia.
- The furthest airport from Bellingham International Airport (BLI) is Tôlanaro Airport (FTU), which is located 10,700 miles (17,220 kilometers) away in Tôlanaro, Madagascar.
- In 1940 the United States Army Corps of Engineers took over the facility and expanded it to three full runways, revetments for parking aircraft, and development of personnel quarters.
Facts about Townsville Airport (TSV):
- During the 1990s a new crisis was looming for Townsville International Airport.
- Townsville International Airport has an integrated terminal building, with the Southern concourse the international terminal, and the Northern concourse the domestic terminal.
- Because of Townsville Airport's relatively low elevation of 18 feet, planes can take off or land at Townsville Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- Townsville Airport was the first Australian regional city airport to be granted international airport status commencing in 1980.
- Townsville Airport handled 1,644,089 passengers last year.
- Townsville Airport (TSV) has 2 runways.
- The future development of the airport is governed by a 30-year master plan.
- The closest airport to Townsville Airport (TSV) is Charters Towers Airport (CXT), which is located 63 miles (102 kilometers) SSW of TSV.
- In April 1980, Sir Rupert Murdoch and Sir Peter Abeles, the new owners of Ansett, were petitioning the Federal Government for international flights to begin in some regional centres of Australia.
- The furthest airport from Townsville Airport (TSV) is Agostinho Neto Airport (NTO), which is located 11,884 miles (19,125 kilometers) away in Ponta do Sol, Santo Antão, Cape Verde.
- In addition to being known as "Townsville Airport", other names for TSV include "Garbutt Airport" and "Townsville International Airport".
- On 15 November 2011, Air North announced plans to commence services between Townsville & Darwin.
