Nonstop flight route between Gustavus, Alaska, United States and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Gustavus Airport (GST), Gustavus, Alaska, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 3,033 miles (or 4,882 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Gustavus Airport and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Gustavus Airport and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Gustavus Airport (GST):

• The closest airport to Gustavus Airport (GST) is Excursion Inlet Seaplane Base (EXI), which is located only 9 miles (15 kilometers) E of GST.
• Because of Gustavus Airport's relatively low elevation of 35 feet, planes can take off or land at Gustavus Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• As per Federal Aviation Administration records, the airport had 11,828 passenger boardings in calendar year 2008, 8,822 enplanements in 2009, and 9,996 in 2010.
• The furthest airport from Gustavus Airport (GST) is Port Elizabeth International Airport (PLZ), which is located 10,541 miles (16,964 kilometers) away in Port Elizabeth, South Africa.
• Gustavus Airport (GST) has 2 runways.

Facts about Decatur County Industrial Air Park (BGE):

• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Following entry of the United States into World War II, the Chief of the Army Air Corps directed the Air Corps Flying Training Command Southeast Training Center to immediately take action to select air base sites needed to increase its pilot training rate to meet anticipated wartime demands.
• The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.