Nonstop flight route between Shirahama, Japan and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Nanki-Shirahama Airport (SHM), Shirahama, Japan and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 7,265 miles (or 11,693 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Nanki-Shirahama Airport and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Nanki-Shirahama Airport and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Nanki-Shirahama Airport (SHM):

• In addition to being known as "Nanki-Shirahama Airport", other names for SHM include "南紀白浜空港" and "Nanki Shirahama Kūkō".
• The closest airport to Nanki-Shirahama Airport (SHM) is Kansai International Airport (KIX), which is located 54 miles (87 kilometers) N of SHM.
• The furthest airport from Nanki-Shirahama Airport (SHM) is Diomício Freitas/Forquilhinha Airport (CCM), which is located 11,994 miles (19,302 kilometers) away in Criciúma, Santa Catarina, Brazil.
• Nanki-Shirahama Airport (SHM) currently has only 1 runway.
• Because of Nanki-Shirahama Airport's relatively low elevation of 293 feet, planes can take off or land at Nanki-Shirahama Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.

Facts about Decatur County Industrial Air Park (BGE):

• Following entry of the United States into World War II, the Chief of the Army Air Corps directed the Air Corps Flying Training Command Southeast Training Center to immediately take action to select air base sites needed to increase its pilot training rate to meet anticipated wartime demands.
• Decatur County Industrial Air Park Airport covers an area of 940 acres at an elevation of 141 feet above mean sea level.
• Today, Bainbridge is used for various purposes in addition to a small amount of aviation activity.
• The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Through the years a lot of material has been gathered about the Southern Airways School and Bainbridge Air Base.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.