Nonstop flight route between Güttin, Mecklenburg-Vorpommern, Germany and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Rügen Airport/ Güttin Airfield (GTI), Güttin, Mecklenburg-Vorpommern, Germany and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 4,807 miles (or 7,735 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Rügen Airport/ Güttin Airfield and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Rügen Airport/ Güttin Airfield and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Rügen Airport/ Güttin Airfield (GTI):

• Rügen Airport/ Güttin Airfield (GTI) currently has only 1 runway.
• The furthest airport from Rügen Airport/ Güttin Airfield (GTI) is Chatham Islands (CHT), which is located 11,584 miles (18,643 kilometers) away in Waitangi, Chatham Islands, New Zealand.
• The closest airport to Rügen Airport/ Güttin Airfield (GTI) is Stralsund Barth Airport (BBH), which is located 25 miles (40 kilometers) W of GTI.
• Because of Rügen Airport/ Güttin Airfield's relatively low elevation of 69 feet, planes can take off or land at Rügen Airport/ Güttin Airfield at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• In the years after 1990 the first charter flights to Bornholm, Berlin-Tempelhof and Hamburg were added.
• The airfield is not far from the railway line from Stralsund via Bergen to Sassnitz/Binz.
• In addition to being known as "Rügen Airport/ Güttin Airfield", another name for GTI is "Flugplatz Rügen/ Regionalflugplatz Güttin".

Facts about Decatur County Industrial Air Park (BGE):

• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Decatur County Industrial Air Park is a county-owned public-use airport located six nautical miles northwest of the central business district of Bainbridge, a city in Decatur County, Georgia, United States.
• Decatur County Industrial Air Park Airport covers an area of 940 acres at an elevation of 141 feet above mean sea level.
• The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
• Decatur County Industrial Air Park (BGE) has 2 runways.