Nonstop flight route between Chesapeake, Ohio / Huntington, West Virginia, United States and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Lawrence County Airpark (HTW), Chesapeake, Ohio / Huntington, West Virginia, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 529 miles (or 851 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Lawrence County Airpark and Decatur County Industrial Air Park, the route shown on this map most likely still appears to be a straight line.

Departure Airport Information:

Arrival Airport Information:

Facts about Lawrence County Airpark (HTW):

• Lawrence County Airpark, originally known as Huntington Airport, was established in 1929.
• Lawrence County Airpark (HTW) currently has only 1 runway.
• The closest airport to Lawrence County Airpark (HTW) is Tri-State Airport (HTS), which is located only 5 miles (8 kilometers) SW of HTW.
• The furthest airport from Lawrence County Airpark (HTW) is Margaret River Airport (MGV), which is located 11,410 miles (18,362 kilometers) away in Margaret River, Western Australia, Australia.
• Because of Lawrence County Airpark's relatively low elevation of 568 feet, planes can take off or land at Lawrence County Airpark at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Lawrence County Airpark is a public use airport located two nautical miles west of the central business district of Chesapeake, a village in Lawrence County, Ohio, United States.
• Lawrence County Airpark covers an area of 86 acres at an elevation of 568 feet above mean sea level.

Facts about Decatur County Industrial Air Park (BGE):

• Decatur County Industrial Air Park is a county-owned public-use airport located six nautical miles northwest of the central business district of Bainbridge, a city in Decatur County, Georgia, United States.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Today, Bainbridge is used for various purposes in addition to a small amount of aviation activity.
• Decatur County Industrial Air Park Airport covers an area of 940 acres at an elevation of 141 feet above mean sea level.
• The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Following entry of the United States into World War II, the Chief of the Army Air Corps directed the Air Corps Flying Training Command Southeast Training Center to immediately take action to select air base sites needed to increase its pilot training rate to meet anticipated wartime demands.