Nonstop flight route between Rampart, Alaska, United States and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Rampart Airport (RMP), Rampart, Alaska, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 3,593 miles (or 5,782 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Rampart Airport and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Rampart Airport and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Rampart Airport (RMP):

• The closest airport to Rampart Airport (RMP) is Five Mile Airport (FMC), which is located 30 miles (49 kilometers) NNE of RMP.
• The furthest airport from Rampart Airport (RMP) is Port Elizabeth International Airport (PLZ), which is located 10,252 miles (16,498 kilometers) away in Port Elizabeth, South Africa.
• Because of Rampart Airport's relatively low elevation of 307 feet, planes can take off or land at Rampart Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• As per Federal Aviation Administration records, the airport had 224 passenger boardings in calendar year 2008, 159 enplanements in 2009, and 224 in 2010.
• Rampart Airport (RMP) currently has only 1 runway.

Facts about Decatur County Industrial Air Park (BGE):

• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
• As a result of the Korean War which began in 1950 and the expansion of the United States Air Force, Bainbridge Air Base* was reopened to train additional pilots.