Nonstop flight route between Celle, Germany and Bainbridge, Georgia, United States:
Departure Airport:
Arrival Airport:
Distance from ZCN to BGE:
Share this route:
Jump to:
- About this route
- ZCN Airport Information
- BGE Airport Information
- Facts about ZCN
- Facts about BGE
- Map of Nearest Airports to ZCN
- List of Nearest Airports to ZCN
- Map of Furthest Airports from ZCN
- List of Furthest Airports from ZCN
- Map of Nearest Airports to BGE
- List of Nearest Airports to BGE
- Map of Furthest Airports from BGE
- List of Furthest Airports from BGE
About this route:
A direct, nonstop flight between Celle Air Base (ZCN), Celle, Germany and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 4,733 miles (or 7,617 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Celle Air Base and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.
Try it at home! Get a globe and tightly lay a string between Celle Air Base and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!
Departure Airport Information:
| IATA / ICAO Codes: | ZCN / ETHC |
| Airport Names: |
|
| Location: | Celle, Germany |
| GPS Coordinates: | 52°35'27"N by 10°1'19"E |
| Operator/Owner: | Federal Ministry of Defence |
| Airport Type: | Military |
| Elevation: | 129 feet (39 meters) |
| # of Runways: | 1 |
| View all routes: | Routes from ZCN |
| More Information: | ZCN Maps & Info |
Arrival Airport Information:
| IATA / ICAO Codes: | BGE / KBGE |
| Airport Name: | Decatur County Industrial Air Park |
| Location: | Bainbridge, Georgia, United States |
| GPS Coordinates: | 30°58'18"N by 84°38'15"W |
| Area Served: | Decatur County |
| Operator/Owner: | Decatur County |
| Airport Type: | Public |
| Elevation: | 141 feet (43 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from BGE |
| More Information: | BGE Maps & Info |
Facts about Celle Air Base (ZCN):
- Celle Air Base (ZCN) currently has only 1 runway.
- Following the end of the Berlin Airlift in 1949, the airfield was again used exclusively by British Forces.
- On 9 March 1935 Hermann Göring officially announced the existence of a German Air Force and the D.L.V.
- The closest airport to Celle Air Base (ZCN) is Hannover Airport (HAJ), which is located only 17 miles (27 kilometers) WSW of ZCN.
- Because of Celle Air Base's relatively low elevation of 129 feet, planes can take off or land at Celle Air Base at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- After RAF Fassberg and RAF Wunstorf Celle became the third airfield in the region to serve in the airlift.
- The furthest airport from Celle Air Base (ZCN) is Chatham Islands (CHT), which is located 11,761 miles (18,928 kilometers) away in Waitangi, Chatham Islands, New Zealand.
- Following the move of its transport wings, the German Air Force did not station any flying units at Celle Air Base.
- In addition to being known as "Celle Air Base", other names for ZCN include "Heeresflugplatz Celle" and "(Advanced Landing Ground B-118)".
Facts about Decatur County Industrial Air Park (BGE):
- The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
- Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
- Today, Bainbridge is used for various purposes in addition to a small amount of aviation activity.
- Following entry of the United States into World War II, the Chief of the Army Air Corps directed the Air Corps Flying Training Command Southeast Training Center to immediately take action to select air base sites needed to increase its pilot training rate to meet anticipated wartime demands.
- Decatur County Industrial Air Park (BGE) has 2 runways.
- Decatur County Industrial Air Park is a county-owned public-use airport located six nautical miles northwest of the central business district of Bainbridge, a city in Decatur County, Georgia, United States.
- The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
