Nonstop flight route between Bainbridge, Georgia, United States and Barre/Montpelier, Vermont, United States:
Departure Airport:

Arrival Airport:

Distance from BGE to MPV:
Share this route:
Jump to:
- About this route
- BGE Airport Information
- MPV Airport Information
- Facts about BGE
- Facts about MPV
- Map of Nearest Airports to BGE
- List of Nearest Airports to BGE
- Map of Furthest Airports from BGE
- List of Furthest Airports from BGE
- Map of Nearest Airports to MPV
- List of Nearest Airports to MPV
- Map of Furthest Airports from MPV
- List of Furthest Airports from MPV
About this route:
A direct, nonstop flight between Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States and Edward F. Knapp State Airport (MPV), Barre/Montpelier, Vermont, United States would travel a Great Circle distance of 1,126 miles (or 1,811 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Decatur County Industrial Air Park and Edward F. Knapp State Airport, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
IATA / ICAO Codes: | BGE / KBGE |
Airport Name: | Decatur County Industrial Air Park |
Location: | Bainbridge, Georgia, United States |
GPS Coordinates: | 30°58'18"N by 84°38'15"W |
Area Served: | Decatur County |
Operator/Owner: | Decatur County |
Airport Type: | Public |
Elevation: | 141 feet (43 meters) |
# of Runways: | 2 |
View all routes: | Routes from BGE |
More Information: | BGE Maps & Info |
Arrival Airport Information:
IATA / ICAO Codes: | MPV / KMPV |
Airport Name: | Edward F. Knapp State Airport |
Location: | Barre/Montpelier, Vermont, United States |
GPS Coordinates: | 44°12'12"N by 72°33'43"W |
Area Served: | Barre / Montpelier |
Operator/Owner: | State of Vermont |
Airport Type: | Public |
Elevation: | 1165 feet (355 meters) |
# of Runways: | 2 |
View all routes: | Routes from MPV |
More Information: | MPV Maps & Info |
Facts about Decatur County Industrial Air Park (BGE):
- The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
- The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
- The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
- During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.
- Decatur County Industrial Air Park (BGE) has 2 runways.
- Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
Facts about Edward F. Knapp State Airport (MPV):
- The closest airport to Edward F. Knapp State Airport (MPV) is Morrisville–Stowe State Airport (MVL), which is located 23 miles (37 kilometers) N of MPV.
- The furthest airport from Edward F. Knapp State Airport (MPV) is Margaret River Airport (MGV), which is located 11,617 miles (18,696 kilometers) away in Margaret River, Western Australia, Australia.
- Edward F. Knapp State Airport (MPV) has 2 runways.
- Airline service began at the Barre-Montpelier Airport on October 22, 1933, serviced by National Airways.