Nonstop flight route between Greenville / Spartanburg, South Carolina, United States and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Greenville–Spartanburg International Airport (GSP), Greenville / Spartanburg, South Carolina, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 305 miles (or 491 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Greenville–Spartanburg International Airport and Decatur County Industrial Air Park, the route shown on this map most likely still appears to be a straight line.

Departure Airport Information:

Arrival Airport Information:

Facts about Greenville–Spartanburg International Airport (GSP):

• The furthest airport from Greenville–Spartanburg International Airport (GSP) is Margaret River Airport (MGV), which is located 11,449 miles (18,425 kilometers) away in Margaret River, Western Australia, Australia.
• Prior to GSP, Greenville and Spartanburg had separate airports and competed for airline service.
• In addition to being known as "Greenville–Spartanburg International Airport", another name for GSP is "Roger Milliken Field".
• Having been served by legacy carriers with large hubs in nearby Atlanta and Charlotte, GSP had historically been plagued with high fares.
• Because of Greenville–Spartanburg International Airport's relatively low elevation of 964 feet, planes can take off or land at Greenville–Spartanburg International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The airport can handle up to 250 passengers per hour through immigration and customs checkpoints.
• Greenville–Spartanburg International Airport handled 1,856,316 passengers last year.
• The closest airport to Greenville–Spartanburg International Airport (GSP) is Greenville Downtown Airport (GMU), which is located only 8 miles (13 kilometers) WSW of GSP.
• Greenville–Spartanburg International Airport (GSP) currently has only 1 runway.
• GSP opened on October 15, 1962, replacing Greenville Downtown Airport as the primary airline destination in the region.

Facts about Decatur County Industrial Air Park (BGE):

• There was little need, however, for the airfield, and in the immediate postwar years, farmers leased the open areas of the airfield for cultivation and the cantonment area was used for various purposes.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Through the years a lot of material has been gathered about the Southern Airways School and Bainbridge Air Base.
• Decatur County Industrial Air Park (BGE) has 2 runways.