Nonstop flight route between Marfa, Texas, United States and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Marfa Municipal Airport (MRF), Marfa, Texas, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 1,151 miles (or 1,852 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Marfa Municipal Airport and Decatur County Industrial Air Park, the route shown on this map most likely still appears to be a straight line.

Departure Airport Information:

Arrival Airport Information:

Facts about Marfa Municipal Airport (MRF):

• Marfa Gliders offers sailplane flight training and glider rides throughout the year and hosts a soaring camp in spring.
• The closest airport to Marfa Municipal Airport (MRF) is Alpine-Casparis Municipal Airport (ALE), which is located only 20 miles (32 kilometers) E of MRF.
• For the 12-month period ending April 23, 2007, the airport had 15,000 aircraft operations, an average of 41 per day, all of which were general aviation.
• The furthest airport from Marfa Municipal Airport (MRF) is Sir Gaëtan Duval Airport (RRG), which is located 11,361 miles (18,283 kilometers) away in Rodrigues Island, Mauritius.
• Because of Marfa Municipal Airport's high elevation of 4,849 feet, planes must typically fly at a faster airspeed in order to takeoff or land at MRF. Combined with a high temperature, this could make MRF a "Hot & High" airport, where the air density is lower than it would otherwise be at sea level.
• Marfa Municipal Airport (MRF) has 3 runways.

Facts about Decatur County Industrial Air Park (BGE):

• There was little need, however, for the airfield, and in the immediate postwar years, farmers leased the open areas of the airfield for cultivation and the cantonment area was used for various purposes.
• As a result of the Korean War which began in 1950 and the expansion of the United States Air Force, Bainbridge Air Base* was reopened to train additional pilots.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Decatur County Industrial Air Park Airport covers an area of 940 acres at an elevation of 141 feet above mean sea level.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Decatur County Industrial Air Park (BGE) has 2 runways.