Nonstop flight route between Amiens, France and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Amiens - Glisy Aerodrome (QAM), Amiens, France and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 4,493 miles (or 7,231 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Amiens - Glisy Aerodrome and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Amiens - Glisy Aerodrome and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Amiens - Glisy Aerodrome (QAM):

• The airport is used for general aviation, with no commercial airline service.
• The closest airport to Amiens - Glisy Aerodrome (QAM) is Aerodrome Abbeville (XAB), which is located 31 miles (50 kilometers) NW of QAM.
• The airport resides at an elevation of 208 feet above mean sea level.
• The furthest airport from Amiens - Glisy Aerodrome (QAM) is Chatham Islands (CHT), which is nearly antipodal to Amiens - Glisy Aerodrome (meaning Amiens - Glisy Aerodrome is almost on the exact opposite side of the Earth from Chatham Islands), and is located 12,014 miles (19,335 kilometers) away in Waitangi, Chatham Islands, New Zealand.
• Amiens - Glisy Aerodrome (QAM) has 2 runways.
• Because of Amiens - Glisy Aerodrome's relatively low elevation of 208 feet, planes can take off or land at Amiens - Glisy Aerodrome at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• In addition to being known as "Amiens - Glisy Aerodrome", other names for QAM include "Aérodrome d'Amiens - Glisy" and "(former Advanced Landing Ground B-48)".

Facts about Decatur County Industrial Air Park (BGE):

• The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
• Through the years a lot of material has been gathered about the Southern Airways School and Bainbridge Air Base.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Today, Bainbridge is used for various purposes in addition to a small amount of aviation activity.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.