Nonstop flight route between Santa Rosa, California, United States and Bainbridge, Georgia, United States:
Departure Airport:
Arrival Airport:
Distance from STS to BGE:
Share this route:
Jump to:
- About this route
- STS Airport Information
- BGE Airport Information
- Facts about STS
- Facts about BGE
- Map of Nearest Airports to STS
- List of Nearest Airports to STS
- Map of Furthest Airports from STS
- List of Furthest Airports from STS
- Map of Nearest Airports to BGE
- List of Nearest Airports to BGE
- Map of Furthest Airports from BGE
- List of Furthest Airports from BGE
About this route:
A direct, nonstop flight between Charles M. Schulz–Sonoma County Airport (STS), Santa Rosa, California, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 2,212 miles (or 3,560 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Charles M. Schulz–Sonoma County Airport and Decatur County Industrial Air Park, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
| IATA / ICAO Codes: | STS / KSTS |
| Airport Names: |
|
| Location: | Santa Rosa, California, United States |
| GPS Coordinates: | 38°30'32"N by 122°48'46"W |
| Airport Type: | Public |
| Elevation: | 125 feet (38 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from STS |
| More Information: | STS Maps & Info |
Arrival Airport Information:
| IATA / ICAO Codes: | BGE / KBGE |
| Airport Name: | Decatur County Industrial Air Park |
| Location: | Bainbridge, Georgia, United States |
| GPS Coordinates: | 30°58'18"N by 84°38'15"W |
| Area Served: | Decatur County |
| Operator/Owner: | Decatur County |
| Airport Type: | Public |
| Elevation: | 141 feet (43 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from BGE |
| More Information: | BGE Maps & Info |
Facts about Charles M. Schulz–Sonoma County Airport (STS):
- In August 2013 the airport started a project to decouple the ends of the two runways and extend runway 14/32 by 885 feet, to 6000 feet and extend runway 1/19 by 200 feet, to 5202 feet.
- Charles M. Schulz–Sonoma County Airport (STS) has 2 runways.
- From the late 1940s until about 1974 Southwest Airways and successors Pacific Air Lines, Air West and Hughes Airwest served Santa Rosa.
- Around 1986 United Airlines entered into a code share agreement with WestAir, a commuter airline that served STS, which in turn began flying as United Express with service to SFO until 2001.
- In addition to being known as "Charles M. Schulz–Sonoma County Airport", another name for STS is "Santa Rosa Army Airfield".
- The closest airport to Charles M. Schulz–Sonoma County Airport (STS) is Marin County Airport (NOT), which is located 29 miles (46 kilometers) SSE of STS.
- The furthest airport from Charles M. Schulz–Sonoma County Airport (STS) is Tôlanaro Airport (FTU), which is located 11,331 miles (18,235 kilometers) away in Tôlanaro, Madagascar.
- Because of Charles M. Schulz–Sonoma County Airport's relatively low elevation of 125 feet, planes can take off or land at Charles M. Schulz–Sonoma County Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
Facts about Decatur County Industrial Air Park (BGE):
- Decatur County Industrial Air Park is a county-owned public-use airport located six nautical miles northwest of the central business district of Bainbridge, a city in Decatur County, Georgia, United States.
- The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
- Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- Decatur County Industrial Air Park (BGE) has 2 runways.
- The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
- A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
- As a result of the Korean War which began in 1950 and the expansion of the United States Air Force, Bainbridge Air Base* was reopened to train additional pilots.
