Nonstop flight route between Susanville, California, United States and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Susanville Municipal Airport (SVE), Susanville, California, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 2,103 miles (or 3,384 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Susanville Municipal Airport and Decatur County Industrial Air Park, the route shown on this map most likely still appears to be a straight line.

Departure Airport Information:

Arrival Airport Information:

Facts about Susanville Municipal Airport (SVE):

• Because of Susanville Municipal Airport's high elevation of 4,149 feet, planes must typically fly at a faster airspeed in order to takeoff or land at SVE. Combined with a high temperature, this could make SVE a "Hot & High" airport, where the air density is lower than it would otherwise be at sea level.
• The furthest airport from Susanville Municipal Airport (SVE) is Tôlanaro Airport (FTU), which is located 11,156 miles (17,953 kilometers) away in Tôlanaro, Madagascar.
• The closest airport to Susanville Municipal Airport (SVE) is Amedee Army AirfieldReno Army Air Base Auxiliary Flight Strip (AHC), which is located 23 miles (38 kilometers) ESE of SVE.
• Susanville Municipal Airport (SVE) has 2 runways.

Facts about Decatur County Industrial Air Park (BGE):

• Following entry of the United States into World War II, the Chief of the Army Air Corps directed the Air Corps Flying Training Command Southeast Training Center to immediately take action to select air base sites needed to increase its pilot training rate to meet anticipated wartime demands.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• There was little need, however, for the airfield, and in the immediate postwar years, farmers leased the open areas of the airfield for cultivation and the cantonment area was used for various purposes.
• During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• As a result of the Korean War which began in 1950 and the expansion of the United States Air Force, Bainbridge Air Base* was reopened to train additional pilots.