Nonstop flight route between Victoria, Texas, United States and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Victoria Regional Airport (VCT), Victoria, Texas, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 750 miles (or 1,206 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Victoria Regional Airport and Decatur County Industrial Air Park, the route shown on this map most likely still appears to be a straight line.

Departure Airport Information:

Arrival Airport Information:

Facts about Victoria Regional Airport (VCT):

• During the 1960s, the Victoria County Airport had regularly-scheduled passenger service via DC-3 aircraft of Trans-Texas Airways.
• The closest airport to Victoria Regional Airport (VCT) is Palacios Municipal Airport (PSX), which is located 41 miles (67 kilometers) ESE of VCT.
• Foster Field began as a United States Army Air Forces facility that was established in 1941 as an advanced single-engine flying school for fighter pilots.
• The furthest airport from Victoria Regional Airport (VCT) is Sir Gaëtan Duval Airport (RRG), which is located 11,048 miles (17,780 kilometers) away in Rodrigues Island, Mauritius.
• Victoria Regional Airport (VCT) has 4 runways.
• Because of Victoria Regional Airport's relatively low elevation of 115 feet, planes can take off or land at Victoria Regional Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.

Facts about Decatur County Industrial Air Park (BGE):

• Decatur County Industrial Air Park (BGE) has 2 runways.
• Following entry of the United States into World War II, the Chief of the Army Air Corps directed the Air Corps Flying Training Command Southeast Training Center to immediately take action to select air base sites needed to increase its pilot training rate to meet anticipated wartime demands.
• A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• As a result of the Korean War which began in 1950 and the expansion of the United States Air Force, Bainbridge Air Base* was reopened to train additional pilots.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.