Nonstop flight route between Dammam, Saudi Arabia and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between King Fahd International Airport (DMM), Dammam, Saudi Arabia and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 7,458 miles (or 12,002 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between King Fahd International Airport and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between King Fahd International Airport and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about King Fahd International Airport (DMM):

• King Fahd International Airport handled 7,000,000 passengers last year.
• King Fahd International Airport (DMM) has 2 runways.
• The furthest airport from King Fahd International Airport (DMM) is Totegegie Airport (GMR), which is nearly antipodal to King Fahd International Airport (meaning King Fahd International Airport is almost on the exact opposite side of the Earth from Totegegie Airport), and is located 12,061 miles (19,411 kilometers) away in Mangareva, Gambier Islands, French Polynesia.
• The airport Mosque is built on the roof of the car park and in the middle of a landscaped area of 46,200 m².
• The total area of the car park is 176,752 m², distributed among three covered floors.
• Dammam airport used to allow smoking throughout the airport, with most seats having ash trays built into the arm rest.
• The airport has two parallel runways with a length of 4,000 m each, in addition to taxiways parallel to the runways and a cross taxiway to connect the two runways.
• The passenger terminal’s total area is 327,000 m².
• In addition to being known as "King Fahd International Airport", other names for DMM include "Dammam Airport" and "مطار الملك فهد الدولي".
• Because of King Fahd International Airport's relatively low elevation of 72 feet, planes can take off or land at King Fahd International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Design started in 1976.
• The closest airport to King Fahd International Airport (DMM) is King Abdulaziz Air Base (DHA), which is located 26 miles (42 kilometers) ESE of DMM.

Facts about Decatur County Industrial Air Park (BGE):

• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Through the years a lot of material has been gathered about the Southern Airways School and Bainbridge Air Base.
• Decatur County Industrial Air Park Airport covers an area of 940 acres at an elevation of 141 feet above mean sea level.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• As a result of the Korean War which began in 1950 and the expansion of the United States Air Force, Bainbridge Air Base* was reopened to train additional pilots.
• Following entry of the United States into World War II, the Chief of the Army Air Corps directed the Air Corps Flying Training Command Southeast Training Center to immediately take action to select air base sites needed to increase its pilot training rate to meet anticipated wartime demands.
• The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.