Nonstop flight route between Deniliquin, New South Wales, Australia and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Deniliquin Airport (DNQ), Deniliquin, New South Wales, Australia and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 9,585 miles (or 15,425 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Deniliquin Airport and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Deniliquin Airport and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Deniliquin Airport (DNQ):

• Because of Deniliquin Airport's relatively low elevation of 316 feet, planes can take off or land at Deniliquin Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The furthest airport from Deniliquin Airport (DNQ) is Flores Airport (FLW), which is nearly antipodal to Deniliquin Airport (meaning Deniliquin Airport is almost on the exact opposite side of the Earth from Flores Airport), and is located 12,092 miles (19,461 kilometers) away in Flores Island, Azores, Portugal.
• Deniliquin Airport (DNQ) has 2 runways.
• The closest airport to Deniliquin Airport (DNQ) is Echuca Airport (ECH), which is located 43 miles (68 kilometers) SSW of DNQ.

Facts about Decatur County Industrial Air Park (BGE):

• Decatur County Industrial Air Park Airport covers an area of 940 acres at an elevation of 141 feet above mean sea level.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
• During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.
• As a result of the Korean War which began in 1950 and the expansion of the United States Air Force, Bainbridge Air Base* was reopened to train additional pilots.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.