Nonstop flight route between Florencia, Caquetá, Colombia and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Gustavo Artunduaga Paredes Airport (FLA), Florencia, Caquetá, Colombia and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 2,115 miles (or 3,404 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between Gustavo Artunduaga Paredes Airport and Decatur County Industrial Air Park, the route shown on this map most likely still appears to be a straight line.

Departure Airport Information:

Arrival Airport Information:

Facts about Gustavo Artunduaga Paredes Airport (FLA):

• Gustavo Artunduaga Paredes Airport (FLA) currently has only 1 runway.
• In addition to being known as "Gustavo Artunduaga Paredes Airport", another name for FLA is "Aeropuerto Nacional Gustavo Artunduaga Paredes".
• The closest airport to Gustavo Artunduaga Paredes Airport (FLA) is Villa Garzón Airport (VGZ), which is located 83 miles (134 kilometers) WSW of FLA.
• Gustavo Artunduaga Paredes Airport is a public domestic, Colombian air terminal run by the Civil Aeronautics.
• The furthest airport from Gustavo Artunduaga Paredes Airport (FLA) is Sultan Thaha Airport (DJB), which is nearly antipodal to Gustavo Artunduaga Paredes Airport (meaning Gustavo Artunduaga Paredes Airport is almost on the exact opposite side of the Earth from Sultan Thaha Airport), and is located 12,382 miles (19,927 kilometers) away in Jambi, Indonesia.
• Because of Gustavo Artunduaga Paredes Airport's relatively low elevation of 803 feet, planes can take off or land at Gustavo Artunduaga Paredes Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.

Facts about Decatur County Industrial Air Park (BGE):

• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Decatur County Industrial Air Park Airport covers an area of 940 acres at an elevation of 141 feet above mean sea level.
• A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
• Following entry of the United States into World War II, the Chief of the Army Air Corps directed the Air Corps Flying Training Command Southeast Training Center to immediately take action to select air base sites needed to increase its pilot training rate to meet anticipated wartime demands.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• Through the years a lot of material has been gathered about the Southern Airways School and Bainbridge Air Base.