Nonstop flight route between Guernsey, Channel Islands, United Kingdom and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between Guernsey Airport (GCI), Guernsey, Channel Islands, United Kingdom and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 4,290 miles (or 6,903 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Guernsey Airport and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Guernsey Airport and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Guernsey Airport (GCI):

• The airport was officially opened on 5 May 1939.
• Sufficient progress on these works has taken place to enable Flybe to introduce an Embraer 175 jet on their existing Gatwick service from 31 March 2013.
• Guernsey Airport handled 886,396 passengers last year.
• Guernsey Airport is the largest airport in the Bailiwick of Guernsey and is the only airport on the island of Guernsey.
• The closest airport to Guernsey Airport (GCI) is Jersey Airport (JER), which is located 24 miles (39 kilometers) SE of GCI.
• The furthest airport from Guernsey Airport (GCI) is Dunedin International Airport (DUD), which is nearly antipodal to Guernsey Airport (meaning Guernsey Airport is almost on the exact opposite side of the Earth from Dunedin International Airport), and is located 12,024 miles (19,350 kilometers) away in Dunedin, Otago, New Zealand.
• Because of Guernsey Airport's relatively low elevation of 336 feet, planes can take off or land at Guernsey Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Guernsey Airport (GCI) currently has only 1 runway.
• Aurigny Air Services has its head office on the airport property.

Facts about Decatur County Industrial Air Park (BGE):

• A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.