Nonstop flight route between New York City, New York, United States and Bainbridge, Georgia, United States:

About this route:

A direct, nonstop flight between John F. Kennedy International Airport (JFK), New York City, New York, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 902 miles (or 1,452 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between John F. Kennedy International Airport and Decatur County Industrial Air Park, the route shown on this map most likely still appears to be a straight line.

Departure Airport Information:

Arrival Airport Information:

Facts about John F. Kennedy International Airport (JFK):

• John F. Kennedy International Airport (JFK) has 4 runways.
• The furthest airport from John F. Kennedy International Airport (JFK) is Margaret River Airport (MGV), which is located 11,764 miles (18,933 kilometers) away in Margaret River, Western Australia, Australia.
• On March 19, 2007 JFK became the first airport in the United States to receive the Airbus A380 with passengers aboard.
• Terminal 2 opened in 1962 as the home of Northeast Airlines, Braniff and Northwest Airlines, and is now exclusively used and operated by Delta Air Lines.
• The closest airport to John F. Kennedy International Airport (JFK) is Flushing Airport (closed 1984) (FLU), which is located only 10 miles (16 kilometers) NNW of JFK.
• The Air Traffic Control Tower, designed by Pei Cobb Freed & Partners and constructed on the ramp-side of Terminal 4, began full FAA operations in October 1994.
• John F. Kennedy International Airport handled 50,423,765 passengers last year.
• Because of John F. Kennedy International Airport's relatively low elevation of 13 feet, planes can take off or land at John F. Kennedy International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The terminal was recently expanded.
• Until the early 1990s, each terminal was known by the primary airline that served it, except for Terminal 4, which was known as the International Arrivals Building.

Facts about Decatur County Industrial Air Park (BGE):

• As a result of the Korean War which began in 1950 and the expansion of the United States Air Force, Bainbridge Air Base* was reopened to train additional pilots.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.