Nonstop flight route between Turin, Italy and Casper, Wyoming, United States:

About this route:

A direct, nonstop flight between Turin Airport (TRN), Turin, Italy and Casper–Natrona County International AirportCasper Army Airfield (CPR), Casper, Wyoming, United States would travel a Great Circle distance of 5,127 miles (or 8,251 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Turin Airport and Casper–Natrona County International AirportCasper Army Airfield, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Turin Airport and Casper–Natrona County International AirportCasper Army Airfield. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Turin Airport (TRN):

• Turin Airport (TRN) currently has only 1 runway.
• The Runway 36 is ILS certified III B for approach with visual range less than 200 meters but not less than 75 meters.
• Turin Airport, also known as Turin-Caselle Airport, is an airport located at Caselle Torinese, 8 nautical miles north-northwest of the city of Turin, in the Province of Turin, Piedmont region, northern Italy.
• Turin Airport handled 3,521,847 passengers last year.
• The closest airport to Turin Airport (TRN) is Aosta Valley Airport (AOT), which is located 39 miles (63 kilometers) NNW of TRN.
• The airport is connected by rail to the city of Turin by the Ferrovia Torino-Ceres, operated by GTT as line A of Turin metropolitan railway service and by bus, by means of the SADEM bus shuttle and charter buses.
• Because of Turin Airport's relatively low elevation of 989 feet, planes can take off or land at Turin Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• The furthest airport from Turin Airport (TRN) is Chatham Islands (CHT), which is nearly antipodal to Turin Airport (meaning Turin Airport is almost on the exact opposite side of the Earth from Chatham Islands), and is located 12,213 miles (19,654 kilometers) away in Waitangi, Chatham Islands, New Zealand.
• The airport was built in 1953 and was renovated in 1989 for the 1990 FIFA World Cup and then again in 2005 in preparation for the Winter Olympics.
• In addition to being known as "Turin Airport", another name for TRN is "Aeroporto di Torino".

Facts about Casper–Natrona County International AirportCasper Army Airfield (CPR):

• Casper–Natrona County International AirportCasper Army Airfield (CPR) has 2 runways.
• The furthest airport from Casper–Natrona County International AirportCasper Army Airfield (CPR) is Sir Gaëtan Duval Airport (RRG), which is located 10,731 miles (17,270 kilometers) away in Rodrigues Island, Mauritius.
• Because of Casper–Natrona County International AirportCasper Army Airfield's high elevation of 5,350 feet, planes must typically fly at a faster airspeed in order to takeoff or land at CPR. Combined with a high temperature, this could make CPR a "Hot & High" airport, where the air density is lower than it would otherwise be at sea level.
• The closest airport to Casper–Natrona County International AirportCasper Army Airfield (CPR) is Converse County Airport (DGW), which is located 55 miles (89 kilometers) E of CPR.
• The 331st was converted to a Very Heavy group in July 1944 and began training for deployment to Twentieth Air Force in the Pacific.
• Near the airport is the NCIA Business Park, which houses over 35 business ranging from manufacturing to aviation.