Nonstop flight route between Bainbridge, Georgia, United States and Teesside, England, United Kingdom:

About this route:

A direct, nonstop flight between Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States and Durham Tees Valley Airport (MME), Teesside, England, United Kingdom would travel a Great Circle distance of 4,246 miles (or 6,833 kilometers).

A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Decatur County Industrial Air Park and Durham Tees Valley Airport, the route shown on this map most likely appears curved because of this reason.

Try it at home! Get a globe and tightly lay a string between Decatur County Industrial Air Park and Durham Tees Valley Airport. You'll see that it will travel the same route of the red line on this map!

Departure Airport Information:

Arrival Airport Information:

Facts about Decatur County Industrial Air Park (BGE):

• A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
• Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Decatur County Industrial Air Park (BGE) has 2 runways.
• The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
• During World War II, the airfield conducted flight training of new pilots by Army Air Forces Flying Training Command.
• The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.

Facts about Durham Tees Valley Airport (MME):

• Durham Tees Valley Airport is an international airport located in Darlington, North East England.
• The airport is situated off the A67 and is within easy reach of the A1, A19, A66 corridors, it is well signposted from all major routes.
• The furthest airport from Durham Tees Valley Airport (MME) is Ryan's Creek Aerodrome (SZS), which is located 11,741 miles (18,895 kilometers) away in Stewart Island, New Zealand.
• In 2002 the airport sought a strategic partner to assist with future development and Peel Airports Ltd was selected as the preferred company, taking a 75% stake in the airport with a commitment to invest £20m over the subsequent five years.
• In 1974, the shares were divided between the newly formed Cleveland and Durham County Councils.
• On 10 February 2012, The Peel group purchased their 75% share back under a new subsidiary, Peel Investments Ltd.
• Because of Durham Tees Valley Airport's relatively low elevation of 120 feet, planes can take off or land at Durham Tees Valley Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
• Durham Tees Valley Airport (MME) currently has only 1 runway.
• Durham Tees Valley Airport handled 161,092 passengers last year.
• The closest airport to Durham Tees Valley Airport (MME) is Newcastle Airport (NCL), which is located 38 miles (61 kilometers) NNW of MME.