Nonstop flight route between Santa Ana, California, United States and Bainbridge, Georgia, United States:
Departure Airport:
Arrival Airport:
Distance from SNA to BGE:
Share this route:
Jump to:
- About this route
- SNA Airport Information
- BGE Airport Information
- Facts about SNA
- Facts about BGE
- Map of Nearest Airports to SNA
- List of Nearest Airports to SNA
- Map of Furthest Airports from SNA
- List of Furthest Airports from SNA
- Map of Nearest Airports to BGE
- List of Nearest Airports to BGE
- Map of Furthest Airports from BGE
- List of Furthest Airports from BGE
About this route:
A direct, nonstop flight between John Wayne Airport (SNA), Santa Ana, California, United States and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 1,941 miles (or 3,124 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the relatively short distance between John Wayne Airport and Decatur County Industrial Air Park, the route shown on this map most likely still appears to be a straight line.
Departure Airport Information:
| IATA / ICAO Codes: | SNA / KSNA |
| Airport Name: | John Wayne Airport |
| Location: | Santa Ana, California, United States |
| GPS Coordinates: | 33°40'32"N by 117°52'5"W |
| Area Served: | Orange County, California |
| Operator/Owner: | Orange County |
| Airport Type: | Public |
| Elevation: | 56 feet (17 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from SNA |
| More Information: | SNA Maps & Info |
Arrival Airport Information:
| IATA / ICAO Codes: | BGE / KBGE |
| Airport Name: | Decatur County Industrial Air Park |
| Location: | Bainbridge, Georgia, United States |
| GPS Coordinates: | 30°58'18"N by 84°38'15"W |
| Area Served: | Decatur County |
| Operator/Owner: | Decatur County |
| Airport Type: | Public |
| Elevation: | 141 feet (43 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from BGE |
| More Information: | BGE Maps & Info |
Facts about John Wayne Airport (SNA):
- After the Orange County Airport was renamed John Wayne Airport in 1979, the John Wayne Associates commissioned sculptor Robert Summers to create a bronze statue of "the Duke." The 9-foot statue, created at Hoka Hey Foundry in Dublin, Texas, was dedicated to the County on November 4, 1982.
- John Wayne Airport covers 500.82 acres.
- The closest airport to John Wayne Airport (SNA) is MCAS El Toro (NZJ), which is located only 8 miles (13 kilometers) E of SNA.
- The furthest airport from John Wayne Airport (SNA) is Pierrefonds Airport (ZSE), which is located 11,490 miles (18,491 kilometers) away in Saint-Pierre, Réunion.
- John Wayne Airport (SNA) has 2 runways.
- John Wayne International Airport is the sole commercial airport in Orange County.
- Because of John Wayne Airport's relatively low elevation of 56 feet, planes can take off or land at John Wayne Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The original single runway was 4,800 feet long, oriented on a magnetic heading of 210 degrees and 30 degrees.
- Terminals A and B were built in 1990 to replace the former Eddie Martin Terminal which was closed upon the new terminals' opening.
- John Wayne Airport is an international airport in Orange County, California, with its mailing address in the city of Santa Ana, hence the IATA airport code.
Facts about Decatur County Industrial Air Park (BGE):
- Following entry of the United States into World War II, the Chief of the Army Air Corps directed the Air Corps Flying Training Command Southeast Training Center to immediately take action to select air base sites needed to increase its pilot training rate to meet anticipated wartime demands.
- Decatur County Industrial Air Park Airport covers an area of 940 acres at an elevation of 141 feet above mean sea level.
- Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
- The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
- A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
- Through the years a lot of material has been gathered about the Southern Airways School and Bainbridge Air Base.
- Decatur County Industrial Air Park (BGE) has 2 runways.
- The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
