Nonstop flight route between Seletar, Singapore and Seattle, Washington, United States:
Departure Airport:
Arrival Airport:
Distance from XSP to BFI:
Share this route:
Jump to:
- About this route
- XSP Airport Information
- BFI Airport Information
- Facts about XSP
- Facts about BFI
- Map of Nearest Airports to XSP
- List of Nearest Airports to XSP
- Map of Furthest Airports from XSP
- List of Furthest Airports from XSP
- Map of Nearest Airports to BFI
- List of Nearest Airports to BFI
- Map of Furthest Airports from BFI
- List of Furthest Airports from BFI
About this route:
A direct, nonstop flight between Seletar Airport (XSP), Seletar, Singapore and King County International Airport (BFI), Seattle, Washington, United States would travel a Great Circle distance of 8,063 miles (or 12,976 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Seletar Airport and King County International Airport, the route shown on this map most likely appears curved because of this reason.
Try it at home! Get a globe and tightly lay a string between Seletar Airport and King County International Airport. You'll see that it will travel the same route of the red line on this map!
Departure Airport Information:
| IATA / ICAO Codes: | XSP / WSSL |
| Airport Names: |
|
| Location: | Seletar, Singapore |
| GPS Coordinates: | 1°25'0"N by 103°52'4"E |
| Area Served: | Singapore |
| Operator/Owner: | Government of Singapore |
| Airport Type: | Civilian public usage |
| Elevation: | 36 feet (11 meters) |
| # of Runways: | 1 |
| View all routes: | Routes from XSP |
| More Information: | XSP Maps & Info |
Arrival Airport Information:
| IATA / ICAO Codes: | BFI / KBFI |
| Airport Names: |
|
| Location: | Seattle, Washington, United States |
| GPS Coordinates: | 47°31'48"N by 122°18'6"W |
| Area Served: | Seattle, Washington |
| Airport Type: | Public |
| Elevation: | 21 feet (6 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from BFI |
| More Information: | BFI Maps & Info |
Facts about Seletar Airport (XSP):
- In December 1966, three Andover CC Mk1 arrived to replace the ageing Vickers Valetta C1 aircraft of 52 Sqn.
- Seletar Airport now operates as a general aviation airport, mainly for chartered flights and training purposes.
- With the threat of war in the area, the RAF started building up their forces in the Far East in the late 1930s and early 1940s.
- Seletar Airport (XSP) currently has only 1 runway.
- Among Seletar’s claim to fame was that several classic aircraft type flew their last RAF Operational sorties from there including the Short Singapore flying boat,Supermarine Spitfire, De Havilland Mosquito, Short Sunderland flying boat and Bristol Beaufighter.
- Because of Seletar Airport's relatively low elevation of 36 feet, planes can take off or land at Seletar Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The furthest airport from Seletar Airport (XSP) is Francisco de Orellana Airport (OCC), which is nearly antipodal to Seletar Airport (meaning Seletar Airport is almost on the exact opposite side of the Earth from Francisco de Orellana Airport), and is located 12,348 miles (19,873 kilometers) away in Coca, Ecuador.
- The RAF station closed at the end of March 1971 and Seletar was handed over to the Singapore Air Defence Command later) by 1973, after the British pullout.
- A Short Singapore Mk III flying boat, similar to those operated by 205 Sqn.
- Vickers Vildebeest Mk IIs, K2918 and K2921, of 'A' Flight, No.
- In addition to being known as "Seletar Airport", other names for XSP include "实里达机场" and "செலட்டர் வான்முகம்".
- The closest airport to Seletar Airport (XSP) is Paya Lebar Air Base (PLAB) (QPG), which is located only 5 miles (8 kilometers) SE of XSP.
Facts about King County International Airport (BFI):
- In addition to being known as "King County International Airport", another name for BFI is "Boeing Field".
- It is in the National Plan of Integrated Airport Systems for 2011–2015, which called it a primary commercial service airport.Federal Aviation Administration records say the airport had 34,597 passenger boardings in calendar year 2008, 35,863 in 2009 and 33,656 in 2010.
- Boeing Field has no scheduled passenger jet flights.
- Because of King County International Airport's relatively low elevation of 21 feet, planes can take off or land at King County International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The Museum of Flight is on the southwest corner of the field.
- Helijet, a helicopter airline based at Vancouver International Airport in British Columbia, scheduled Sikorsky S-76s to the Victoria Harbour Heliport in British Columbia and on to Helijet's Vancouver Harbour Heliport near downtown Vancouver, B.C.
- The furthest airport from King County International Airport (BFI) is Tôlanaro Airport (FTU), which is located 10,775 miles (17,341 kilometers) away in Tôlanaro, Madagascar.
- King County International Airport (BFI) has 2 runways.
- The closest airport to King County International Airport (BFI) is Renton Municipal Airport (RNT), which is located only 5 miles (8 kilometers) ESE of BFI.
