Nonstop flight route between Florence, Italy and Bainbridge, Georgia, United States:
Departure Airport:
Arrival Airport:
Distance from FLR to BGE:
Share this route:
Jump to:
- About this route
- FLR Airport Information
- BGE Airport Information
- Facts about FLR
- Facts about BGE
- Map of Nearest Airports to FLR
- List of Nearest Airports to FLR
- Map of Furthest Airports from FLR
- List of Furthest Airports from FLR
- Map of Nearest Airports to BGE
- List of Nearest Airports to BGE
- Map of Furthest Airports from BGE
- List of Furthest Airports from BGE
About this route:
A direct, nonstop flight between Florence Airport, Peretola (FLR), Florence, Italy and Decatur County Industrial Air Park (BGE), Bainbridge, Georgia, United States would travel a Great Circle distance of 5,040 miles (or 8,111 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Florence Airport, Peretola and Decatur County Industrial Air Park, the route shown on this map most likely appears curved because of this reason.
Try it at home! Get a globe and tightly lay a string between Florence Airport, Peretola and Decatur County Industrial Air Park. You'll see that it will travel the same route of the red line on this map!
Departure Airport Information:
| IATA / ICAO Codes: | FLR / LIRQ |
| Airport Names: |
|
| Location: | Florence, Italy |
| GPS Coordinates: | 43°48'36"N by 11°12'14"E |
| Area Served: | Florence, Italy |
| Operator/Owner: | Aeroporto di Firenze |
| Airport Type: | Public |
| Elevation: | 144 feet (44 meters) |
| # of Runways: | 1 |
| View all routes: | Routes from FLR |
| More Information: | FLR Maps & Info |
Arrival Airport Information:
| IATA / ICAO Codes: | BGE / KBGE |
| Airport Name: | Decatur County Industrial Air Park |
| Location: | Bainbridge, Georgia, United States |
| GPS Coordinates: | 30°58'18"N by 84°38'15"W |
| Area Served: | Decatur County |
| Operator/Owner: | Decatur County |
| Airport Type: | Public |
| Elevation: | 141 feet (43 meters) |
| # of Runways: | 2 |
| View all routes: | Routes from BGE |
| More Information: | BGE Maps & Info |
Facts about Florence Airport, Peretola (FLR):
- The furthest airport from Florence Airport, Peretola (FLR) is Chatham Islands (CHT), which is nearly antipodal to Florence Airport, Peretola (meaning Florence Airport, Peretola is almost on the exact opposite side of the Earth from Chatham Islands), and is located 12,055 miles (19,401 kilometers) away in Waitangi, Chatham Islands, New Zealand.
- In the late 1940s Peretola welcomed its first passenger flights with the DC-3 Aerea Teseo.
- The closest airport to Florence Airport, Peretola (FLR) is Siena-Ampugnano Airport (SAY), which is located 38 miles (62 kilometers) S of FLR.
- Because of Florence Airport, Peretola's relatively low elevation of 144 feet, planes can take off or land at Florence Airport, Peretola at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- In addition to being known as "Florence Airport, Peretola", another name for FLR is "Aeroporto di Firenze-Peretola".
- The airport is connected with the city by a bus service from the central railway station every half hour, operated by the local Florence city bus company ATAF.
- In 1992 the building now dedicated to arrivals, constructed by AdF, was inaugurated.
- It is a small airport, with a single runway and the main taxiway is situated at the end of runway 05, with an overshoot/holding area at the end of runway 23.
- Florence Airport, Peretola (FLR) currently has only 1 runway.
- Peretola was a great field where airplanes landed and took off without any mandatory direction until the Ministry of Aeronautics decided to enlarge and upgrade the now aged flight field.
Facts about Decatur County Industrial Air Park (BGE):
- Decatur County Industrial Air Park is a county-owned public-use airport located six nautical miles northwest of the central business district of Bainbridge, a city in Decatur County, Georgia, United States.
- The contractor broke ground on 3 April 1942, for Bainbridge Army Airfield.
- Through the years a lot of material has been gathered about the Southern Airways School and Bainbridge Air Base.
- Because of Decatur County Industrial Air Park's relatively low elevation of 141 feet, planes can take off or land at Decatur County Industrial Air Park at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- Decatur County Industrial Air Park (BGE) has 2 runways.
- The closest airport to Decatur County Industrial Air Park (BGE) is Tallahassee Regional Airport (TLH), which is located 43 miles (70 kilometers) SSE of BGE.
- The furthest airport from Decatur County Industrial Air Park (BGE) is Kalbarri Airport (KAX), which is located 11,278 miles (18,150 kilometers) away in Kalbarri, Western Australia, Australia.
- A level area near Bainbridge, seven miles northwest of the City adjacent to the Seaboard Air Line Railroad was selected by the Air Corps, and the City of Bainbridge and Decatur County purchased 2,070 acres for $66,800 and then leased the property to the Army for $1 per annum for a basic flight training base authorizing 89.9 million for its construction.
