Nonstop flight route between Seletar, Singapore and Grand Rapids, Michigan, United States:
Departure Airport:
Arrival Airport:
Distance from XSP to GRR:
Share this route:
Jump to:
- About this route
- XSP Airport Information
- GRR Airport Information
- Facts about XSP
- Facts about GRR
- Map of Nearest Airports to XSP
- List of Nearest Airports to XSP
- Map of Furthest Airports from XSP
- List of Furthest Airports from XSP
- Map of Nearest Airports to GRR
- List of Nearest Airports to GRR
- Map of Furthest Airports from GRR
- List of Furthest Airports from GRR
About this route:
A direct, nonstop flight between Seletar Airport (XSP), Seletar, Singapore and Gerald R. Ford International Airport (GRR), Grand Rapids, Michigan, United States would travel a Great Circle distance of 9,321 miles (or 15,000 kilometers).
A Great Circle is the shortest distance between 2 points on a sphere. Because most world maps are flat (but the Earth is round), the route of the shortest distance between 2 points on the Earth will often appear curved when viewed on a flat map, especially for long distances. If you were to simply draw a straight line on a flat map and measure a very long distance, it would likely be much further than if you were to lay a string between those two points on a globe. Because of the large distance between Seletar Airport and Gerald R. Ford International Airport, the route shown on this map most likely appears curved because of this reason.
Try it at home! Get a globe and tightly lay a string between Seletar Airport and Gerald R. Ford International Airport. You'll see that it will travel the same route of the red line on this map!
Departure Airport Information:
| IATA / ICAO Codes: | XSP / WSSL |
| Airport Names: |
|
| Location: | Seletar, Singapore |
| GPS Coordinates: | 1°25'0"N by 103°52'4"E |
| Area Served: | Singapore |
| Operator/Owner: | Government of Singapore |
| Airport Type: | Civilian public usage |
| Elevation: | 36 feet (11 meters) |
| # of Runways: | 1 |
| View all routes: | Routes from XSP |
| More Information: | XSP Maps & Info |
Arrival Airport Information:
| IATA / ICAO Codes: | GRR / KGRR |
| Airport Name: | Gerald R. Ford International Airport |
| Location: | Grand Rapids, Michigan, United States |
| GPS Coordinates: | 42°52'50"N by 85°31'22"W |
| Area Served: | Grand Rapids, Michigan |
| Operator/Owner: | Kent County |
| Airport Type: | Public |
| Elevation: | 794 feet (242 meters) |
| # of Runways: | 3 |
| View all routes: | Routes from GRR |
| More Information: | GRR Maps & Info |
Facts about Seletar Airport (XSP):
- The closest airport to Seletar Airport (XSP) is Paya Lebar Air Base (PLAB) (QPG), which is located only 5 miles (8 kilometers) SE of XSP.
- The furthest airport from Seletar Airport (XSP) is Francisco de Orellana Airport (OCC), which is nearly antipodal to Seletar Airport (meaning Seletar Airport is almost on the exact opposite side of the Earth from Francisco de Orellana Airport), and is located 12,348 miles (19,873 kilometers) away in Coca, Ecuador.
- With the threat of war in the area, the RAF started building up their forces in the Far East in the late 1930s and early 1940s.
- During the 1960s, RAF Seletar was home base to No's 103 and 110 Squadrons, both of which were equipped with Westland Whirlwind Mk 10 helicopters and to 34 Squadron, which was equipped with Blackburn Beverleys.
- There had been a proposal to extend its runway to 2,000 metres, so as to be able to receive the Boeing 737 used by many budget airlines.
- In addition to being known as "Seletar Airport", other names for XSP include "实里达机场" and "செலட்டர் வான்முகம்".
- In December 1966, three Andover CC Mk1 arrived to replace the ageing Vickers Valetta C1 aircraft of 52 Sqn.
- When the Japanese launched their invasion of Malaya and Singapore, Seletar housed the RAF’s 205 Sqn with PBY Catalina flying boats and 36 and 100 Sqns with obsolete Vickers Vildebeest torpedo bombers, along with 151 Maintenance Unit.
- Because of Seletar Airport's relatively low elevation of 36 feet, planes can take off or land at Seletar Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- The RAF station closed at the end of March 1971 and Seletar was handed over to the Singapore Air Defence Command later) by 1973, after the British pullout.
- In 2007, JTC Corporation announced the plan to upgrade the Seletar Airport to support the upcoming Seletar Aerospace Park.
- Seletar Airport (XSP) currently has only 1 runway.
- Catalina I of 205 Sqn undergoing servicing in their hangar at RAF Seletar.
- The Republic of Singapore Flying Club, Seletar Flying Club and Singapore Flying College are situated at Seletar Airport.
Facts about Gerald R. Ford International Airport (GRR):
- Because of Gerald R. Ford International Airport's relatively low elevation of 794 feet, planes can take off or land at Gerald R. Ford International Airport at a lower air speed than at airports located at a higher elevation. This is because the air density is higher closer to sea level than it would otherwise be at higher elevations.
- Cargo Carriers |FedEx Express | Memphis, Indianapolis, Rochester, NY |FedEx Feeder operated by CSA Air | Sault Ste.
- Gerald R. Ford International Airport (GRR) has 3 runways.
- The closest airport to Gerald R. Ford International Airport (GRR) is Park Township Airport (HLM), which is located 33 miles (53 kilometers) W of GRR.
- 81,221,489 pounds of air freight were handled in 2012, representing an increase of 0.6% over the previous year.
- The furthest airport from Gerald R. Ford International Airport (GRR) is Margaret River Airport (MGV), which is located 11,165 miles (17,969 kilometers) away in Margaret River, Western Australia, Australia.
- In 1959 construction began on the present airport in Cascade Township, several miles east of the original one.
- In 2004 the airport served more than 2 million passengers for the first time in a year.
